Microchip BM78SPPS5NC2-0002AA Bluetooth Chip 4.2

  • RS-stocknr. 123-8531
  • Fabrikantnummer BM78SPPS5NC2-0002AA
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

BM78 Bluetooth 4.2 Dual Mode Module

The Microchip BM78 is a Bluetooth Version 4.2 Dual-Mode Module that supports BR/EDR and BLE communication. The module provides a fully certified Bluetooth solution that removes the hurdle of RF design regulatory and compliance testing, reducing development time.

The BM78 supports GAP, SDP, SPP, and GATT profiles. Data is transferred over the Bluetooth link via transparent UART mode, which when combined with the module’s UART interface simplifies the task of integrating the BM78 with a host MCU. Configuration of the module can be completed by using a Windows compatible Graphical User Interface (GUI) or directly by MCU.

Features

Supports Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (LE)
Bluetooth SIG certified
Full Bluetooth stack on-board
Transparent UART mode for seamless serial data transfer over UART interface
Easy to configure with Windows GUI or directly by MCU
Secure AES128 encryption
GAP, SDP, SPP, GATT profiles
Firmware field upgradable via UART
Compact surface mount module: 22 x 12 x 2.4 mm
Multiple I/O pins for control and status

Certifications

FCC, R&TTE, IC, MIC, KCC and NCC

Bluetooth - Microchip

Specificaties
Kenmerk Waarde
Bluetooth Class Class 2
Bluetooth Version 4.2
Maximum Output Power +1.5dBm
Receiver Sensitivity -92 (LE) dBm, -90 (BR/EDR) dBm
Supported Bus Interfaces ATT, GAP, GATT, L2CAP, SMP, UART
Supported I/O Interfaces I2C
Dimensions 12 x 22 x 2.4mm
Height 2.4mm
Length 12mm
Maximum Operating Temperature +70°C
Minimum Operating Temperature -20°C
Width 22mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
6,91
(excl. BTW)
8,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 6,91
10 - 24
€ 6,68
25 - 99
€ 6,51
100 +
€ 6,35
Related Products
The CYBLE-01201x-x0 module contains all the necessary components ...
Description:
The CYBLE-01201x-x0 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. Two versions are available: one fully qualified and certified ...
The Pmod BT2 provides Bluetooth 2.1 wireless communication ...
Description:
The Pmod BT2 provides Bluetooth 2.1 wireless communication through an RN-42 radio transceiver module. • Bluetooth 2.1/2.0/1.2/1.0 protocol compatible• Class 2 device with range up to 10m (line-of-sight)• Supports HID profile for making accessories such as pointing devices• Security: 128-bit ...
The RN4870 module is based on the IS187x ...
Description:
The RN4870 module is based on the IS187x Bluetooth device and provides a complete solution to implement Bluetooth 4.2 Low Energy connectivity. The module is interfaced to a host MCU via a UART serial port using Microchip’s ASCII command set ...
The Microchip RN4871 BLE module is based on ...
Description:
The Microchip RN4871 BLE module is based on the IS187x Bluetooth RF SoC and is ideal for easily adding wireless connectivity to your IoT and wearable designs. The RN4871 provides a control interface to the IS187x IC, based on ASCII ...