Cypress Semiconductor CYBLE-012011-00 Bluetooth Chip 4.1

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

CYBLE-01201x-x0 EZ-BLE Bluetooth Module

The CYBLE-01201x-x0 module contains all the necessary components to add low-power Bluetooth BLE wireless connectivity to a project design. It includes a royalty-free BLE stack compatible with the Bluetooth 4.1 standard. Two versions are available: one fully qualified and certified and an uncertified module without a screening can for initial lab development only. PSoC Creator™ provides an integrated design environment (IDE) to configure, develop, program and test a BLE application.

CYBL10 48MHz Cortex-M0 core PRoC with 128KB Flash memory, 16KB RAM
RF Frequency Range: 2400 to 2482MHz ISM band
RF Power Output: up to +3dBm
Receiver Sensitivity: -87dBm
OTA Data Rate: 1Mbps
Up to 23 x GPIO
Up to 22 x capacitive sensors for buttons or sliders with liquid tolerance
8-channel 12-bit, 1Msps ADC with internal reference, sample-and-hold (S/H) and channel sequencer
2 x serial communication blocks (SCB) supporting I²C (master/slave), SPI (master/slave), or UART
LCD drive supported on all GPIOs (common or segment)
Programmable low voltage detect (LVD) from +1.8 to +4.5Vdc
I²S master interface
PCB antenna
BLE protocol stack supporting generic access profile (GAP) Central, Peripheral, Observer and Broadcaster roles
Switches between Central and Peripheral roles on-the-go
Standard BLE profiles and services
Power modes: Active, Sleep, Deep Sleep, Hibernate and Stop
Power supply +1.8V to +5.5Vdc
Operating temperature range: -40 to +85°C
Dimensions: 14.52 x 19.20mm, SMT format
Applications: Short range communication for the Internet of Things (IoT)

RS Product Codes
124-4406 CYBLE-012011-00 PRoC EZ-BLE Radio Module, fully certified
124-4407 CYBLE-012012-10 PRoC EZ-BLE Radio Module, uncertified

Note

An evaluation board is available under RS Part No. 124-4197.

Approvals

CE, FCC, IC, MIC, KC (CYBLE-012011-00 only)

Specificaties
Kenmerk Waarde
Bluetooth Version 4.1
Maximum Output Power +3dBm
Receiver Sensitivity -87dBm
Supported Bus Interfaces I2C, SPI, UART
Supported I/O Interfaces Serial
Dimensions 14.52 x 19.2 x 2mm
Height 2mm
Length 14.52mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 19.2mm
53 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,04
(excl. BTW)
10,94
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 9,04
Verpakkingsopties
Related Products
The Microchip RN4871 BLE module is based on ...
Description:
The Microchip RN4871 BLE module is based on the IS187x Bluetooth RF SoC and is ideal for easily adding wireless connectivity to your IoT and wearable designs. The RN4871 provides a control interface to the IS187x IC, based on ASCII ...
The LM910 from LM Technologies is a Bluetooth ...
Description:
The LM910 from LM Technologies is a Bluetooth Smart Ready module. It features a Host Controller Interface (HCI) via USB interface. Simply plug in the LM910 module into a host computer or MCU and you are ready to go. The ...
Bluetooth® Version: 5.0 (2Mbps mode)Frequency: 2402 to 2480 ...
Description:
Bluetooth® Version: 5.0 (2Mbps mode)Frequency: 2402 to 2480 MHzOutput power: +4dBm typ.Single power supply: 1.7 - 3.6VSingle Mode Bluetooth® low energyIntegrated System/Sleep ClockIntegrated high performance ceramic chip antennaARM Cortex M4F 32bit processor and 512KB flash and 64KB RAMOutline: 9.6 x ...
The ON Semiconductor Bluetooth SoC is an RSL10 ...
Description:
The ON Semiconductor Bluetooth SoC is an RSL10 series, USB dongle enables rapid prototyping of peripherals for Bluetooth version 5 low energy devices. It has low energy explorer software, engineers can develop, test, and evaluates Bluetooth based applications quickly and ...