RS PRO BNC Series Straight 50Ω Panel Mount Bulkhead Fitting BNC Connector, jack, Nickel, Solder Termination

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: TW
Productomschrijving

RS 50 Ohm BNC RF Coaxial Bulkhead Jack Receptacle

50 Ohm BNC RF coaxial bulkhead jack receptacle connectors with bayonet coupling, solder termination and grounding tab. These 50 Ohm BNC RF coax bulkhead jack sockets have a nickel plated brass and body, nut, washers and gold plated centre contact.

RS 50 Ohm BNC RF Bulkhead BNC Connector Jack

From RS PRO, this panel BNC connector is designed for use with coaxial cables, and features a bulkhead and screw on nut for rear mounting to panels and chassis. It is also supplied with a grounding tab.

The connector has a robust nickel plated body, and features the secure and convenient bayonet coupling system typical of a BNC connector. The centre pin contact is gold plated, for excellent conductivity over a long service life, and there is also a PTFE insulator for increased reliability.

Features and Benefits

• BNC plug with bulkhead
• Nickel plated body provides a heavy-duty build quality
• Gold contacts ensure maximum efficiency
• Solder termination
• 50Ω impedance
• Operating frequency of 4GhZ
• Insulation material: PTFE

Applications

BNC connectors are used in a variety of RF signal applications. Though they are most commonly used in radio and television broadcast applications, they can also be used in medical and test equipment.

• Antenna connection
• Cable Modems
• Telecom
• Medical Equipment
• Satcom
• CCTV

FAQs

Q: How should I connect a BNC connector to a coaxial cable?

A: This BNC connector is solder pin terminating, and requires a solder kit for a long lasting and reliable cable termination.
Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

N/A

RS BNC Connectors

RS BNC connectors are suitable for a variety of applications including video signalling and test equipment.

Specificaties
Kenmerk Waarde
Gender Female
Mounting Type Panel Mount
Impedance 50Ω
Termination Method Solder
Body Orientation Straight
Bulkhead Yes
Operating Frequency 4GHz
Body Plating Nickel
Polarity Normal
Series BNC
Contact Material Brass
Contact Plating Gold
87 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1523 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
2,23
(excl. BTW)
2,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 2,23
10 - 24
€ 2,01
25 - 49
€ 1,81
50 - 99
€ 1,63
100 +
€ 1,56
Related Products
50 Ohm ZDC/BNC RF coaxial PCB mount socket ...
Description:
50 Ohm ZDC/BNC RF coaxial PCB mount socket connector with a low profile design and circular metal body. This 50 Ohm ZDC/BNC RF coaxial PCB mount vertical jack connector has a nickel plated zinc die cast body, thermoplastic dielectric and ...
50 Ohm ZDC BNC RF coaxial insulated bulkhead ...
Description:
50 Ohm ZDC BNC RF coaxial insulated bulkhead socket connectors with bayonet coupling, solder termination and ground tab. These 50 Ohm BNC RF coax insulated bulkhead socket connectors are front panel mounting with a PBT insulator, thermoplastic dielectric, a nickel ...
Right angle or elbow PCB mount 50 Ohm ...
Description:
Right angle or elbow PCB mount 50 Ohm BNC jacks with a PTFE dielectric, silver plated brass body, silver plated contact and solder terminals.
Brass-bodied connectors with PTFE insulators and beryllium copper ...
Description:
Brass-bodied connectors with PTFE insulators and beryllium copper female contacts. Available in crimp or clamp options. For information regarding appropriate crimp tooling please refer to the Connector/Cable/Tooling Compatability table at the beginning of this section. Cut-outs are illustrated for respective ...