Cooper Bussmann, 32A, Bolted Tag Fuse, gG, 460 V dc, 660 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

Eaton’s Bussmann® series Red Spot centre tagged fuse links (in sizes B1 to B4 and C1 to C3 and D1) are specifically designed for the protection of general industrial applications, e.g. power distribution, cable protection, motor protection.

Fuse-link, LV, 32 A, AC 660 V, DC 460 V 88, 27 x 129 mm, gL/gG

Good peak and let-through current limitation
1:1.6 Selective coordinate ratio between ’downstream’ and ’upstream’ fuse
gM type offer enhanced motor starting capability

Specificaties
Kenmerk Waarde
Current Rating 32 A
Voltage Rating 460 V dc, 660 V ac
Fuse Standard BS88, IEC 60269
Fixing Centres 97mm
Application Category GG
Tag Width 14.3mm
Overall Length 128.7mm
Body Diameter 26.2mm
Body Length 58mm
Tag Orientation Centred
Tag Type Bolted
Fuse Dimensions 26.2 (Dia.) x 58
Series TBC
8 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
35,75
(excl. BTW)
43,26
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
€ 35,75
20 - 99
€ 31,54
100 - 249
€ 28,21
250 - 499
€ 25,51
500 +
€ 23,31
Related Products
Semiconductor fuse links have a precise pre-determined performance ...
Description:
Semiconductor fuse links have a precise pre-determined performance which ensures a low arc voltage and minimum let through current. Semiconductor fuses are suited to application in the field of traction, distribution of power, motor drives and in process industries. Melt ...
As the fuse allows for the starting surge ...
Description:
As the fuse allows for the starting surge of a motor its full load current must not exceed the lesser of the dual current rating. e.g. 20 M25 must not have a continuous load of greater than 20A. Breaking capacity ...
Note that in the table below I2t is ...
Description:
Note that in the table below I2t is the pre-arcing value; I2t Total is the clearing value at 240Vac. Compact dimensionsExcellent current limiting featuresHigh speed clearance of ac and dc faultsMelt Point Curve Class IEC 269-4Manufactured by Cooper Bussmann, branded ...
These fuses are designed for : “General purpose ...
Description:
These fuses are designed for : “General purpose use” protection (gG type) or motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by ...