Phoenix Contact, AI Insulated Crimp Bootlace Ferrule, 10mm Pin Length, 1.1mm Pin Diameter, 0.5mm² Wire Size, White

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Insulated Bootlace Ferrules AI Series - Phoenix Contact

Phoenix contact provides you with a range of great insulated ferrules that can be crimped onto the end of a cable or wire to give your connection more stability and prevention from fraying. These bootlace crimp ferrules are made from a soft tin-plated electrolytic copper and have a soft plastic cover to further enhance the connection and prevention of fraying. Designed with safety in mind, they're free from any silicone and halogen.

Features and benefits:

  • Insulated

  • Prevent splicing of wires to ensure a stable connection over the long term

  • No need for soldering, a crimping tool is all that is required to fit the ferrules (see below for tools)

  • Reliability of close connections is massively increased

  • Maximum operating temperature of 105°C so can be used in harsh conditions

How to crimp a bootlace ferrule?

Ferrules are simple and easy to install. Firstly, they're mounted to the end of a stripped cable and are simply compressed onto the cable (typically with a tool) to form a tight and sturdy fit onto a cable. Once they're crimped onto the cable, give a gentle tug to ensure it is tight. Once you're sure it is tight, you can then proceed to mate your wire with connector.

What are bootlace ferrules used for?

Bootlace ferrules are used to help prevent the cable splicing or fraying when a connection is made. Typically the terminal blocks use a screw-connection, so if you have a bootlace ferrule mounted on your wire, this allows the screw to make a better bond rather than a few strands of metal cable. Not to mention, installing a bootlace ferrule ensures your connection is easier to install and remove.

Compatible hand tools:

  • Plier Crimper - 0.25mm² to 6mm²: 803-4405

  • Plier Crimper - 0.5mm² to 6mm²: 803-4427

  • Plier Crimper - 0.25mm² to 6mm²: 803-4411

  • Plier Crimper - 0.14mm² to 10mm²: 803-4420

3201275

The 3201275 is a white coded insulation ferrule and contains all the same specifications as above. This ferrule can take a maximum wire size of 0.5mm² and has a length of 16mm.

Phoenix Contact Bootlace Ferrules

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 0.5mm²
Pin Diameter 1.1mm
Number of Entries 1
Insulation Material Plastic
Colour White
Pin Length 10mm
Insulation Insulated
Overall Length 16mm
Series AI
1100 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2900 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 100)
0,20
(excl. BTW)
0,24
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
100 - 400
€ 0,20
€ 20,00
500 - 2400
€ 0,17
€ 17,00
2500 - 4900
€ 0,14
€ 14,00
5000 - 9900
€ 0,13
€ 13,00
10000 +
€ 0,119
€ 11,90
*prijsindicatie
Related Products
Cinch Connectivity insulated binding posts have a nylon ...
Description:
Cinch Connectivity insulated binding posts have a nylon insulating body and silver-plated brass stud with a turret termination. The solderless jack series accept wire sizes to 16-gauge and has a built in strain relief for a longer life. Breakdown Voltage: ...
A range of industrial standard French colour coded ...
Description:
A range of industrial standard French colour coded insulated bootlace ferrule crimp terminals. These insulated bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The terminals ...
A range of industrial standard uninsulated bootlace ferrule ...
Description:
A range of industrial standard uninsulated bootlace ferrule crimp terminals with a twin cable entry. These bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The ...
Schneider Electrics cable ends are commonly referred to ...
Description:
Schneider Electrics cable ends are commonly referred to as a crimp bootlace ferrule, they are comprised of tin-plated copper tubes that have been crimped (compressed for joining) over a standard wire to accomplish a reliable connection. This range of bootlace ...