Conex-Banninger 90° Elbow Solder Ring Copper Solder Fitting for 15 x 15mm Pipes

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

90° Elbow

Standards

BS 2871 Part 1; BS 864 Part 2; ISO 274; BS 219 Grade 99 C

Approvals

WRC

Solder Ring Fittings

High quality Water Research Council (WRC) approved copper solder ring capillary fittings.,Suitable for connecting copper tubes in accordance with BS2871 Part 1 and ISO 274. These potable solder ring fittings are manufactured in accordance with BS864 Part 2 and are a lead-free joint. The solder complies with BS219 Grade 99C. These products use the principle of capillary action to ensure that, when correctly joined to copper tube, a sufficient layer of lead-free solder is present between tube and fittings to form a mechanically strong, leak proof joint without the need for external solder application. Threaded components are in accordance with BS864 Part 2.,These fittings may be used with potable water, light mineral oils, natural or liquid petroleum gases or compressed air.

Specificaties
Kenmerk Waarde
Fitting Direction 90°
Fitting Type Elbow
Compatible Pipe Size 15 x 15mm
Material Copper
Solder Type Solder Ring
1300 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 25)
0,784
(excl. BTW)
0,949
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 100
€ 0,784
€ 19,60
125 - 225
€ 0,752
€ 18,80
250 - 600
€ 0,735
€ 18,375
625 +
€ 0,719
€ 17,975
*prijsindicatie
Related Products
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solventEasy and quick to install, simple push-in connectionsSafe, secure and leak-proof, ready for immediate useUnique collet ...
Brass FittingsWorking Pressure: 10 bar at 23°C, 7 ...
Description:
Brass FittingsWorking Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. Converts Air Ring Main Push-In Fittings to male BSP thread.
The Tectite range of remountable fittings have been ...
Description:
The Tectite range of remountable fittings have been designed to withstand the rigorous demands of the mechanical services sector. Manufactured from DZR brass. Provides an electrical continuity. For use in the mechanical services sector on hot and cold services, heating ...
Enhanced performance demountable DZR brass fittingsFeatures a stainless ...
Description:
Enhanced performance demountable DZR brass fittingsFeatures a stainless steel grab ringSuitable for use with copper or plastic tubeFor use in the mechanical services sector on hot and cold water applicationsProvides electrical continuity.