Breadboard Prototyping Board 203.3 x 194.31 x 1.6mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

DIP Breadboards

A range of low density boards designed for wiring integrated circuits.
The 0 V and Vdc power supply lines are repeated on the component side of the board, increasing the distribution capacity.
The contacts are replaced by individual pads designed to take connection plugs.

Specificaties
Kenmerk Waarde
Type Prototyping Board
Length 203.3mm
Width 194.31mm
Height 1.6mm
Dimensions 203.3 x 194.31 x 1.6mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,36
(excl. BTW)
65,78
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 54,36
5 - 9
€ 51,65
10 - 39
€ 48,92
40 +
€ 46,21
Related Products
Adaption circuit board for 8-Pin-Sockets with a distance ...
Description:
Adaption circuit board for 8-Pin-Sockets with a distance of 7.62 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop maskHole spacing 2.54 mm2 x 4 two-hole-pads on each sideU-shape potential strip.
Adaption circuit board for 14-Pin-Sockets with a distance ...
Description:
Adaption circuit board for 14-Pin-Sockets with a distance of 7.62 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop maskHole spacing 2.54 mm2 x 7 two-hole-pads on each sideU-shape potential strip.
Adaption circuit board for 14-pin sockets with a ...
Description:
Adaption circuit board for 14-pin sockets with a distance of 7.62 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop maskHole spacing 2.54 mm7 three-hole-pads and 2 x 7 two-hole-pads on each sideU-shape ...
Adaption circuit board for 16-Pin-Sockets with a distance ...
Description:
Adaption circuit board for 16-Pin-Sockets with a distance of 7.62 mmEpoxy fibre-glass FR4 1.50 mmDouble-sided 35 μm CuPlated through holes (PTH)Hot air leveling (HAL leadfree)Solder stop maskHole spacing 2.54 mm2 x 8 two-hole-pads on each sideU-shape potential strip.