Taiwan Semiconductor Bridge Rectifier, 10A, 1000V, 4-Pin
- RS-stocknr.:
- 169-9171
- Fabrikantnummer:
- GBU1007 D2
- Fabrikant:
- Taiwan Semiconductor
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 169-9171
- Fabrikantnummer:
- GBU1007 D2
- Fabrikant:
- Taiwan Semiconductor
Datasheets
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
GBU1001 to GBU1007, 10A Single-Phase Bridge Rectifier, Taiwan Semiconductor
Soldering pins for Printed Circuit Board (PCB) mounting
High case dielectric strength of 1500V RMS
High surge current capability
Typical Reverse Current less than 0.1μA
High case dielectric strength of 1500V RMS
High surge current capability
Typical Reverse Current less than 0.1μA
Approvals
UL, E-326243
Bridge Rectifiers - Taiwan Semiconductor
A Bridge Rectifier is a diode common application, known for converting an Alternating Current (AC) input into Direct Current a (DC) output. A diode bridge is an arrangement of four diodes in a bridge circuit configuration that provides the same polarity of output for either polarity of input.
Specificaties
Kenmerk | Waarde |
|---|---|
| Peak Average Forward Current | 10A |
| Bridge Type | Single Phase |
| Peak Reverse Repetitive Voltage | 1000V |
| Mounting Type | Through Hole |
| Package Type | GBU |
| Pin Count | 4 |
| Diode Technology | Silicon Junction |
| Configuration | Single |
| Peak Non-Repetitive Forward Surge Current | 220A |
| Maximum Operating Temperature | +150 °C |
| Minimum Operating Temperature | -55 °C |
| Peak Forward Voltage | 1.1V |
| Peak Reverse Current | 5µA |
| Length | 22.3mm |
| Dimensions | 22.3 x 3.56 x 18.8mm |
| Width | 3.56mm |
| Height | 18.8mm |
- RS-stocknr.:
- 169-9171
- Fabrikantnummer:
- GBU1007 D2
- Fabrikant:
- Taiwan Semiconductor