Thorlux Lighting, 70 W SON-E Bulkhead Light, 230 V ac Anti-corrosive, Die Cast Aluminium, IP65

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Thorlux Passlight SON Downlighter

This Thorlux Lighting Wall mounted downlight is a high quality, British made product. Made in strong pressure die cast aluminium, LM6M high corrosion resistant and thermally, shock resistant glass.

Die cast aluminium alloy body
Textured black powder coated frame
Impact resistant polycarbonate cover
Four captive steel screws secure frame to body
Cover hinges down for lamp replacement
Body tapped both ends for 20mm conduit entry
BESA box mounting

Note

To convert existing Passlight SON luminaires to LED, please see RS 784-4882 (Thorlux Passlight Retrofit LED gear Tray Kit)

Exterior Amenity Bulkheads

Specificaties
Kenmerk Waarde
Type Bulkhead
Wattage 70 W
Voltage Rating 230 V ac
Lamp Type SON-E
Length 318 mm
Width 210 mm
Depth 180 mm
Dimensions 318 x 210 x 180 mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature -20°C
Case Material Die Cast Aluminium
Anti-corrosive Yes
Operating Temperature Range -20 → +40°C
IP Rating IP65
EU Energy Efficiency Rating A+
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
223,96
(excl. BTW)
270,99
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 223,96
Related Products
The Knightsbridge round LED bulkhead is 12 W, ...
Description:
The Knightsbridge round LED bulkhead is 12 W, 4000K, with a 30000-hour life expectancy. This luminaire is made from a robust polycarbonate body with an opal lens, which ensures the optimal lumen output is reached. A built-in microwave sensor provides ...
Designed to replace GLS red bulkheads90,000 hr, 3000mcd ...
Description:
Designed to replace GLS red bulkheads90,000 hr, 3000mcd LED'sWide operating temperature rangeFitted with a high impact red polycarbonate diffuserBases have 20mm conduit knockouts for side and bottom cable entry.
Body and frame in strong pressure die-cast LM6M ...
Description:
Body and frame in strong pressure die-cast LM6M highly corrosion resistant aluminiumTextured black full polyester powder finishCover frame retained on two stainless steel safety chainsPrismatic polycarbonate lensFixings outside gasket line to preserve IP ratingAluminium gear tray with LED bar60,000 hour ...
Strong pressure die-cast LM24 aluminium bodyTextured black, full ...
Description:
Strong pressure die-cast LM24 aluminium bodyTextured black, full polyester powder finish as standardHinged satin flame-retardant polycarbonate coverTamper-resistant cover screws as standardBezel trim for semi-recessed mounting60,000 hour LED life expectancyFitted with 4000K LEDs.