RS Components
Onze website gebruikt cookies en soortgelijke technologieën om u nog beter van dienst te zijn bij het zoeken of het plaatsen van een bestelling, voor analytische doeleinden en om advertenties te personaliseren.
 
Fabrikantnummer

TE Connectivity Insulated Male Crimp Bullet Connector, 0.25mm² to 1.6mm², 20AWG to 15AWG, 4mm Bullet diameter, Red


4 op voorraad - levertijd is 2 werkdag(en).
Add to Basket

Prijs 1 Box of 1000

€ 419,23

(excl. BTW)

€ 507,27

(incl. BTW)

Box(es)

Toegevoegd

RS-stocknr.:
163-9897
Fabrikantnummer:
165590-1
Fabrikant:
TE Connectivity
Land van herkomst:
BE
Box(es)Per doosPer stuk*
1 +€ 419,23€ 0,419
*prijsindicatie

TE Connectivity PIDG Crimp Bullet Connectors


PIDG (Pre-Insulated Diamond Grip) bullet connectors consisting of receptacle and plug terminals designed for uniform reliability in the most difficult circuit environments. These PIDG crimp bullet connectors consist of a precision-formed high conductivity copper body and barrel. Serrations inside the wire barrel provide maximum contact and tensile strength after crimping. The wire barrel is surrounded with a copper sleeve which provides wire insulation support. An outer colour coded nylon sleeve allows easy identification of wire size. These PIDG crimp bullet connectors also feature a funnelled wire entry which allows fast wire insertion during high-speed production. The construction of these PIDG terminals and the use of specialised tool dies allows a uniform and reliable crimp to be achieved
Available with various wire, barrel and stud sizes, these PIDG bullet terminals offer a versatile solution to a wide range of wiring applications


Features and Benefits


• High conductivity copper body
• Copper sleeve for improved wire insulation support
• Serrations in wire barrel for maximum contact and tensile strength
• Colour coded sleeves for easy wire size and tooling identification
• Funnelled wire entry for easy wire insertion
• Design enables a reliable and uniform crimp


Application


These PIDG crimp bullet connectors are suitable for use in a wide range of applications with many terminals meeting or exceeding the requirements of MIL-T-7928, Type II, Class 1 and 2. Applications include instruments/control, lighting, power supplies, panel boxes, transportation, lifting equipment, motors, aerospace and appliances.


TE Connectivity PIDG Terminals

KenmerkWaarde
Series165590
InsulationInsulated
Insulation MaterialCopper
Overall Length22.7mm
GenderMale
Minimum Wire Size mm²0.25mm²
Maximum Wire Size mm²1.6mm²
Minimum Wire Size AWG20AWG
Maximum Wire Size AWG15AWG
Bullet Diameter4mm
ColourRed
Shrouded/UnshroudedUnshrouded
Contact PlatingTin
Contact MaterialBrass