Texas Instruments SN75176BP Bus Transceiver, 8-Pin PDIP

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

RS-485 Line Drivers and Receivers, High Speed, Texas Instruments

A range of High Speed RS-485 Line Drivers, Receivers and Transceivers from Texas Instruments with data rates of 10 Mbit/s or over.

RS-485 Line Drivers and Receivers

Specificaties
Kenmerk Waarde
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Minimum Operating Temperature 0 °c
Width 6.6mm
Length 10.16mm
Maximum Operating Temperature +70 °C
Dimensions 10.16 x 6.6 x 4.57mm
Height 4.57mm
Prijs Each (In a Pack of 10)
1,945
(excl. BTW)
2,353
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
€ 1,945
€ 19,45
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Related Products
Texas Instruments range of Bus Transceivers from the ...
Description:
Texas Instruments range of Bus Transceivers from the 74LVC Family of Low-voltage CMOS Logic ICs. The 74LVC Family use silicon gate CMOS technology and is designed to operate at 3.3V, allowing a significant reduction in power consumption when compared to ...
Texas Instruments range of Bus Transceivers from the ...
Description:
Texas Instruments range of Bus Transceivers from the 74HCT Family of CMOS Logic ICs. Inputs of the 74HCT family are 74LSTTL compatible, and the products use silicon gate CMOS technology to achieve operating speeds similar to the LSTTL family but ...
Advanced Very Low-Voltage CMOS logicSingle gate packageOperating Voltage: ...
Description:
Advanced Very Low-Voltage CMOS logicSingle gate packageOperating Voltage: 1.2 to 3.6Compatibility: Input LVCMOS, Output LVCMOSLatch-up performance exceeds 100 mA per JESD 78 Class IIESD protection exceeds JESD 22.
The 74HC373: 74HCT373 is an octal D-type transparent ...
Description:
The 74HC373: 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are ...