Toshiba 74VHCT540AFT, 9 Bus Transceiver, 8-Bit Inverting CMOS, TTL, 20-Pin TSSOP

  • RS-stocknr. 171-3506
  • Fabrikantnummer 74VHCT540AFT
  • Fabrikant Toshiba
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The 74VHCT540AFT and 74VHCT541AFT are advanced high speed CMOS OCTAL BUS BUFFERs fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The 74VHCT240AFT is an inverting 3-state buffer having two active-low output enables. The 74VHCT244AFT is a non-inverting 3-state buffer, and has two active-low output enables. These devices are designed to be used with 3-state memory address drivers, etc. The input voltage are compatible with TTL output voltage. These devices may be used as a level converter for interfacing 3.3 V to 5 V system. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc

Wide operating temperature range: Topr = -40 to 125 
High speed: tpd = 5.4 ns (typ.) at VCC = 5.0 V
Low power dissipation: ICC = 2.0 μA (max) at Ta = 25 
Compatible with TTL inputs : VIL = 0.8 V (max): VIH = 2.0 V (min)
Power down protection is provided on all inputs and outputs.
Balanced propagation delays: tPLH ≈ tPHL
Low noise: VOLP = 1.0 V (max)
Pin and function compatible with the 74 series (AC/HC/AHC/LV etc.) 245 type

Specificaties
Kenmerk Waarde
Logic Family 74VHCT
Number of Elements per Chip 9
Number of Channels per Chip 8
Polarity Inverting
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 20
Input Level CMOS, TTL
Output Level CMOS, TTL
Maximum High Level Output Current -8mA
Maximum Low Level Output Current 8mA
Maximum Propagation Delay Time @ Maximum CL 10.5 ns @ 50 pF
Maximum Operating Supply Voltage 5.5 V
Length 6.5mm
Automotive Standard AEC-Q100
Propagation Delay Test Condition 50pF
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 4.5 V
Dimensions 6.5 x 4.4 x 1mm
Minimum Operating Temperature -40 °C
Height 1mm
Width 4.4mm
6400 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 25)
0,274
(excl. BTW)
0,332
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
25 - 75
€ 0,274
€ 6,85
100 - 475
€ 0,216
€ 5,40
500 - 975
€ 0,147
€ 3,675
1000 +
€ 0,118
€ 2,95
*prijsindicatie
Verpakkingsopties
Related Products
The HEF4013B is a dual D-type flip-flop that ...
Description:
The HEF4013B is a dual D-type flip-flop that features independent set-direct input (SD), clear-direct input (CD), clock input (CP) and outputs (Q, Q). Data is accepted when CP is LOW and is transferred to the output on the positive-going edge ...
The 74LVC1G175 is a low-power, low-voltage single positive ...
Description:
The 74LVC1G175 is a low-power, low-voltage single positive edge triggered D-type flip-flop with individual data (D) input, clock (CP) input, master reset (MR) input, and Q output. The master reset (MR) is an asynchronous active LOW input and operates independently ...
The Maxim SOT-23 package 6-pin I2C to 1 ...
Description:
The Maxim SOT-23 package 6-pin I2C to 1 wire bridge device translator that interfaces directly to standard (100kHz max) or fast (400kHz max) I2C masters to perform protocol conversion between the I2C master and any downstream 1-Wire slave devices. Relative ...
Dual inverter, The 74HC2G04, 74HCT2G04 is a high-speed ...
Description:
Dual inverter, The 74HC2G04, 74HCT2G04 is a high-speed Si-gate CMOS device. The 74HC2G04, 74HCT2G04 provides two inverting buffers. Mixed 5 V and 3.3 V applicationsImproved current drive and voltage level of signalsImproved signal integrity for complex layoutsWide supply voltage rangeLow ...