Flexicon Straight Cable Conduit Fitting, Brass Nickel Plated 20mm nominal size IP65 M20

  • RS-stocknr. 872-5993
  • Fabrikantnummer FSU20-M20-C
  • Fabrikant Flexicon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

FSU C Fittings, Fixed, Multipart Compression, External Thread, Nickel Plated Brass, Straight

Flexicon FSU metallic conduit fittings are UK manufactured to the highest standards. They exhibit high tensile strength and are vibration tested for secure installations. Simple construction for ease of installation; tested and approved to the latest national and international standards.

Fixed conduit fitting with external thread and multipart compression fitting
Elastomeric seal
Can be used for knockouts or threaded entries as fitting rotates until tightened
Nickel plated brass
IP65 (see note)

Note

FSU Type C fittings and FSU conduit will ensure an IP65 protection rating.

Approvals

CE
BS EN IEC 61386
REACh
RoHS

Flexicon Flexible Conduit

Specificaties
Kenmerk Waarde
Fitting Type Straight
Nominal Size 20mm
Material Brass
Thread Size M20
Finish Nickel Plated
IP Rating IP65
Minimum Operating Temperature -15°C
Maximum Operating Temperature +70°C
For Use With FSU Conduit Systems
Standards Met BS EN IEC 61386, CULus Certified, LUL Standard 1-085 (Cert.No. 296), Rail Accreditation, REACH Compliant, RoHS Compliant
Series FSU
20 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
7,456
(excl. BTW)
9,022
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
€ 7,456
€ 74,56
50 - 140
€ 5,97
€ 59,70
150 +
€ 5,673
€ 56,73
*prijsindicatie
Related Products
A range of fittings suitable for use with ...
Description:
A range of fittings suitable for use with PMA Ecoflex, PMA Smart Line and PMAFLEX conduits. One-piece – ready for installationSimple “push-in” installationRe-opening only possible with a screwdriverIntegrated sealing lip in thread flangeGood pull-out strengthIP66 Static, IP54 DynamicSelf-extinguishing, ...
A selection of high shock resistant, push-in fittings ...
Description:
A selection of high shock resistant, push-in fittings designed for use with PMAFLEX conduits, manufactured from modified Polyamides. They have a locking feature which prevents unauthorised removal by the need to use a screwdriver to reopen, these fittings can be ...
IP66 (with Fittings)-20°C to +100°C operating temperature Halogen ...
Description:
IP66 (with Fittings)-20°C to +100°C operating temperature Halogen & Phosphor freeUL94 Flame ClassPush-in fittings are one piece with integral cone seal and have a screwdriver release mechanism for security reasons Resistant to: fuels, mineral oils, fats, alkalis & common solvents. ...
HelaGuard nickel plated brass straight fitting which fulfils ...
Description:
HelaGuard nickel plated brass straight fitting which fulfils IP65. Multi-part compression fitting including elastomeric sealExternal thread swivels about the main body even after tighteningHalogen free and RoHS compliant.