3M Refill Roll Cable Label Refill, for Dispenser

  • RS-stocknr. 734-8848
  • Fabrikantnummer 1027566
  • Fabrikant 3M
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

3M Adhesive Cable Marking Kit and Refill Tape

With 10 refillable compartments the ScotchCode Tape Dispenser is not only compact but also portable, able to hold 8ft rolls it features an end loop hook for tool pouches or belts. Providing fast, convenient and easy to cut dispensing with little waste, an ideal solution to electrical and automotive label needs.

RS Article 308-092 dispenser is already filled with 10 rolls of standard numbered tape, marked 0-9 in black on white, the tape is non-smear polyester. For marking binder groups, cable or wire, designed to be 'high tack' acrylic. The tape is resistant to solvents, oils and water adhering firmly to insulation surfaces. Smooth surfaced tape allows you to easily wipe off dirt and grime, and is durable for industrial electrical application.

Tape roll refills available:

296-337 (digit 0)
734-8848 (digit 1)
296-309 (digit 2)
296-438 (digit 3)
296-422 (digit 4)
296-236 (digit 5)
296-365 (digit 6)
395-119 (digit 7)
296-343 (digit 8)
296-321 (digit 9)

Features and Benefits:

Dispenser
• 10 refillable compartments
• Loop hook ended
• Contamination protection for tapes
• Dispenses desired length
Tape rolls
• Durable with aggressive adhesive
• Wipe clean
• 0°C to 49°C application temperature
• -40°C to 121°C operating temperature
• 5.46mm width, 2.4m length, 0.08mm thickness

Frequently asked questions:

How do you use cable markers?
Specifically designed for identifying cables, cable markers are essential in conduit and bundles. They not only assist engineers and technicians with identifying wires or cables, but they also assist with health, safety and effective maintenance.

How you use a cable marker can vary, as their method of application can differ. Adhesive and self-laminating are generally used for terminated wires, they wrap around the wire with a clear protective layer. Clip and slide on labelling are generally colour coded or pre-printed with letters, numbers and symbols. The single characters can also be combined to create a legend. Some are straight, some are chevron shaped. Whilst slide on markers need to be applied pre-termination, clip-on can be applied after termination. Heat shrink, shrunk to fit the cable are flexible, durable and do not fall off. Tie on tags or markers can generally be used on larger bundles.
RS offers a large range of cable ties, markers, labels and kits.

Specificaties
Kenmerk Waarde
Accessory Type Refill Roll
For Use With Dispenser
10 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 5)
3,612
(excl. BTW)
4,371
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
€ 3,612
€ 18,06
75 - 245
€ 3,432
€ 17,16
250 +
€ 3,252
€ 16,26
*prijsindicatie
Related Products
The RS PRO cable stripper is an extremely ...
Description:
The RS PRO cable stripper is an extremely efficient tool designed for trimming the insulation of existing meter tails or strip new cables of dimensions 16mm² to 25mm² before fitting the safety collar and cable marker. This tool is handy ...
System of strong polyester labels and transparent polyethylene ...
Description:
System of strong polyester labels and transparent polyethylene label holders fixed with nylon 6.6 tiesMarking and identification of cables, pipes, etcSuitable for temporary or permanent markingsSupplied as A4 sheets suitable for laser printersOperating temperature -60 → +65°C.
Similar to the mixed colour kit (stock no. ...
Description:
Similar to the mixed colour kit (stock no. 113-2596) but with the addition of brown and grey heatshrink tubing to meet the requirements of the April 2004 – April 2006 change in phase colours in electrical building wires. Contains selection ...
RiteOn cable marker label refills, replacement marker pens ...
Description:
RiteOn cable marker label refills, replacement marker pens and filled dispensers. The dispenser can be held easily in palm of hand to provide a flat writing surface. The flexible white vinyl film labels dispense automatically when liner is pulled from ...