HellermannTyton Straight Cable Boot Black, Fluid Resistant Elastomer, 30mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Heatshrink mouldings, Series 100

Heatshrink connector terminal housing, straight
The inner lip guarantees increased strain relief
For use with circular connectors to VG standard
Protects against environmental influences

//media.rs-online.com/t_line/L0420782-20.gif

Standards

VG 95343 T06

Specificaties
Kenmerk Waarde
Type Straight Cable Boot
Inside Diameter Primary 30mm
Inside Diameter Secondary 30mm
Adhesive Lined No
Material Fluid Resistant Elastomer
Number of Breakouts 1
Shrink Temperature +135°C
Colour Black
Minimum Operating Temperature -75°C
Maximum Operating Temperature +150°C
Shrunk Diameter Primary 14mm
Shrunk Diameter Secondary 6mm
12 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
11,23
(excl. BTW)
13,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 11,23
15 - 49
€ 10,68
50 +
€ 10,10
Related Products
Moulded parts that provide durable strain relief, protection ...
Description:
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
TE Connectivity Thermofit polyolefin moulded heat shrink cable ...
Description:
TE Connectivity Thermofit polyolefin moulded heat shrink cable boots are flame retardant and semi-rigid. The Thermofit series is available in a wide range of sizes to suit various cables and connectors.
General purpose Y-Shaped heat shrink moulded parts. These ...
Description:
General purpose Y-Shaped heat shrink moulded parts. These heat shrink boots provide strain relief and protection on cable harnesses. • Y-Shape transition• Good resistance to aggressive chemicals at high temperature• Manufactured from fluid resistant elastomer• Available with 2, 3 or ...