ITT Cannon Cable Boot, 16.51mm

  • RS-stocknr. 167-9540
  • Fabrikantnummer 317-1398-000/ENDGEHÄUSE SURE SEAL SS 2 POL
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Sureseal Cable Boots

Seals wired cable jackets to the connector housing
Provides abrasion resistance

Note

Contacts must be ordered separately

//media.rs-online.com/t_line/L167954-07.gif

IP67 ITT Sureseal & Mini Sureseal

Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop and low contact resistance.

The simple, one-piece moulded body means that no other parts, apart from the contacts, are required to complete the connection
The plugs and receptacles are polarised to prevent mis-mating, by means of 2 stepped planes on each of the mating faces, which must be properly oriented in order for the contacts to engage
The mated connectors are IP67 rated and sealing integrity is still maintained with exposure to brake fluid, gasoline, diesel fuel, anti-freeze, ultra-violet, ozone and steam cleaning under normal operating conditions
Cable Boots, see for example, stock no. 167-9540 to seal the wired cable jacket to the connector housing are available and must be ordered separately.

Sure-Seal connectors incorporate many features:

The mini Sure-Seal range of connectors offers all the advantages of the ITT Sureseal product but with reduced size. The compact design coupled with resistance to brake fluid, anti-freeze, fuels and steam cleaning enables the connector to be used in any harsh environment area of the vehicle.

Note

Contacts must be ordered separately

Specificaties
Kenmerk Waarde
Type Cable Boot
Inside Diameter Primary 16.51mm
Inside Diameter Secondary 9.65mm
Adhesive Lined No
Number of Breakouts 1
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
110 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
430 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
7,624
(excl. BTW)
9,225
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 95
€ 7,624
€ 38,12
100 - 195
€ 6,862
€ 34,31
200 +
€ 6,174
€ 30,87
*prijsindicatie
Related Products
Designed for use where hazard reduction in the ...
Description:
Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by ...
Moulded parts that provide durable strain relief, protection ...
Description:
Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and ...
Designed for use where hazard reduction in the ...
Description:
Designed for use where hazard reduction in the event of fire is crucial. Widely used in marine, transport, offshore and other high specification applications. Other features include low smoke index as defined by NES711, low toxicity index as defined by ...
A range of connector heatshrink boots and accessories ...
Description:
A range of connector heatshrink boots and accessories for use with the Terrapin range of harsh environment connectors. Offered in straight and right angle versions and a variety of shell sizes. IP68 sealingRobust and tamperproofSuitable for harsh environments.