TE Connectivity Multi-Legged Boot Black, Modified Polyolefin Adhesive Lined, 22.86mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: MX
Productomschrijving

Thermoform® Multi-Legged Boots

Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications.

Flame retardant
Adhesive sealant replaces tapes, epoxies and grease
Reliable sealing on cable jackets and on lead, steel, copper, aluminium and most elastomeric insulation materials.
Water tight.
Range; -55° to +90°C, min recovery +120°C

Approvals

ABS; DNV; Lloyd's; MIL-I-81765/1A

Specificaties
Kenmerk Waarde
Type Multi-Legged Boot
Inside Diameter Primary 22.86mm
Inside Diameter Secondary 8.38mm
Adhesive Lined Yes
Material Modified Polyolefin
Number of Breakouts 3
Shrink Temperature +121°C
Colour Black
Minimum Operating Temperature -55°C
Maximum Operating Temperature +90°C
Shrunk Diameter Primary 9.14mm
Shrunk Diameter Secondary 2.29mm
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
4 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,69
(excl. BTW)
26,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 21,69
15 - 49
€ 20,61
50 +
€ 19,53
Related Products
SUPERSEAL Series 1.5 black elastomer cable support cover ...
Description:
SUPERSEAL Series 1.5 black elastomer cable support cover boots for automotive connector plug and cap housings.Stock number 366-2061 has 2 waysStock number 366-2077 has 3 waysStock number 679-7132 has 4 ways. Sturdy and reliable contactsDouble contact spring designSecondary lock ensures ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Cold shrink end caps can be used to ...
Description:
Cold shrink end caps can be used to environmentally seal and mechanically protect exposed cable ends with no tools or tape use involved. Close endedTubular EDPM rubber sleevesFactory expandedRemovable coreReliable sealEnvironmental damage protectionEasy to install and removeCable ends protected from ...