TE Connectivity Multi-Legged Boot Black, Modified Polyolefin Adhesive Lined, 43.18mm

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Thermoform® Multi-Legged Boots

Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications.

Flame retardant
Adhesive sealant replaces tapes, epoxies and grease
Reliable sealing on cable jackets and on lead, steel, copper, aluminium and most elastomeric insulation materials.
Water tight.
Range; -55° to +90°C, min recovery +120°C

Approvals

ABS; DNV; Lloyd's; MIL-I-81765/1A

Specificaties
Kenmerk Waarde
Type Multi-Legged Boot
Inside Diameter Primary 43.18mm
Inside Diameter Secondary 20.32mm
Adhesive Lined Yes
Material Modified Polyolefin
Number of Breakouts 3
Shrink Temperature +121°C
Colour Black
Minimum Operating Temperature -55°C
Maximum Operating Temperature +90°C
Shrunk Diameter Primary 22.86mm
Shrunk Diameter Secondary 4.83mm
236 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
21,91
(excl. BTW)
26,51
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 21,91
15 - 49
€ 20,83
50 +
€ 19,72
Related Products
SUPERSEAL Series 1.5 black elastomer cable support cover ...
Description:
SUPERSEAL Series 1.5 black elastomer cable support cover boots for automotive connector plug and cap housings.Stock number 366-2061 has 2 waysStock number 366-2077 has 3 waysStock number 679-7132 has 4 ways. Sturdy and reliable contactsDouble contact spring designSecondary lock ensures ...
SUPERSEAL Series 1.5 black elastomer cable support cover ...
Description:
SUPERSEAL Series 1.5 black elastomer cable support cover boots for automotive connector plug and cap housings.Stock number 366-2061 has 2 waysStock number 366-2077 has 3 waysStock number 679-7132 has 4 ways. Sturdy and reliable contactsDouble contact spring designSecondary lock ensures ...
Heatshrink connector terminal housing, straightThe inner lip guarantees ...
Description:
Heatshrink connector terminal housing, straightThe inner lip guarantees increased strain reliefFor use with circular connectors to VG standardProtects against environmental influences.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...