TE Connectivity Straight Cable Boot Black, Fluid Resistant Elastomer, 24mm

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

General Purpose (Lipped) - 202K1 and 222K1 Series

Moulded parts that provide durable strain relief, protection and an environmental seal when used with an adhesive. Available in straight and right angled types, these chemical and abrasion resistant heat shrink boots are made from a tough modified elastomer, and meet the Def Stan 59-97 Issue 3 Type DE requirements. Other features include recommended shrink temperature 175°C, self-extinguishing to RK6713 and an electric strength of 12MV/m (min.) Meets specification VG95343 parts 6, 7, 8, 9. These boots can be used with spin coupling backshells, but may also be used wherever a connector offers a suitable rear mounting.

//media.rs-online.com/t_line/L239138-01.gif
Specificaties
Kenmerk Waarde
Type Straight Cable Boot
Inside Diameter Primary 24mm
Inside Diameter Secondary 24mm
Adhesive Lined No
Material Fluid Resistant Elastomer
Number of Breakouts 1
Colour Black
Minimum Operating Temperature -75°C
Maximum Operating Temperature +150°C
Shrunk Diameter Primary 10.4mm
Shrunk Diameter Secondary 5.6mm
58 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
10,56
(excl. BTW)
12,78
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
€ 10,56
15 - 49
€ 10,14
50 - 99
€ 9,79
100 - 249
€ 9,33
250 +
€ 8,04
Related Products
Cold shrink end caps are moulded in black ...
Description:
Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on anapplicator ring for easy application on-site or in storage areas, without the need forgrease, tools or a torch; they ensure a reliable seal. They provide ...
Ensures that cable ends are waterproof and permits ...
Description:
Ensures that cable ends are waterproof and permits long term storage without risk of moisture penetration. It is a medium wall moulded cap internally coated with an adhesive sealant.,Installation is simple, the cap is centred over the end of the ...
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Specially designed to provide mechanical and environmental protection ...
Description:
Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant. Thick adhesive-lining forms an effective barrier ...