TE Connectivity End Cap Black, Semi-Rigid Polyolefin Adhesive Lined, 5.72mm

  • RS-stocknr. 316-0896
  • Fabrikantnummer ES-CAP-NO.1-C1-0-30MM-RS
  • Fabrikant TE Connectivity
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

End Caps 4:1

Specially designed to provide mechanical and environmental protection of stubs and splices in electrical harnesses and also ideal for sealing off cable ends. Clear cap allows see through inspection, black caps are flame retardant.

Thick adhesive-lining forms an effective barrier against fluids & moisture
4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters
Mechanically tough jacket provides strain relief and abrasion protection
Range; -40°C to +105°C. min recovery 100°C
100 per bag.

Approvals

UL recognised component

Approvals

UL Listed (E85381)

Specificaties
Kenmerk Waarde
Type End Cap
Inside Diameter Primary 5.72mm
Adhesive Lined Yes
Material Semi-Rigid Polyolefin
Shrink Temperature +100°C
Colour Black
Minimum Operating Temperature -40°C
Maximum Operating Temperature +105°C
Shrunk Diameter Primary 1.27mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-06-2020, met een levertijd van 1 werkdag.
Prijs 1 Bag of 100
13,57
(excl. BTW)
16,42
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 - 14
€ 13,57
€ 0,136
15 - 49
€ 12,89
€ 0,129
50 +
€ 12,22
€ 0,122
*prijsindicatie
Related Products
Cold shrink end caps are moulded in black ...
Description:
Cold shrink end caps are moulded in black EPR, are UV-resistant and are pre-expanded on anapplicator ring for easy application on-site or in storage areas, without the need forgrease, tools or a torch; they ensure a reliable seal. They provide ...
VG standard-compliant heatshrink connector terminal housing with inner ...
Description:
VG standard-compliant heatshrink connector terminal housing with inner lip, angledSuitable for connecting circular connectors on thin cablesEnsure mechanical protection and strain relief.
T-shaped moulded parts with 45° or 90° side ...
Description:
T-shaped moulded parts with 45° or 90° side breakouts. Manufactured from heat shrink DR-25 material these moulded parts have good resistance to aggressive chemicals at high temperature. • Provides strain relief, protection and mechanical support• Shrink Ratio 2:1• Flame retardant. ...
Heat shrinkable boots providing a watertight seal and ...
Description:
Heat shrinkable boots providing a watertight seal and protecting cables and equipment from corrosion and mechanical abuse, for most mass transit, military and commercial marine applications. Flame retardantAdhesive sealant replaces tapes, epoxies and greaseReliable sealing on cable jackets and on ...