- RS-stocknr.:
- 718-3118
- Fabrikantnummer:
- 202K132-3/42-0
- Fabrikant:
- TE Connectivity
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 718-3118
- Fabrikantnummer:
- 202K132-3/42-0
- Fabrikant:
- TE Connectivity
Datasheets
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
Wetgeving en compliance
Productomschrijving
Ready Coated General Purpose (Lipped) - 202K1 and 222K1 Series
High performance pre-coated epoxy adhesive option on the 202K straight and 222K right angled boots (-25 Fluid resistant modified elastomer).
Specificaties
Kenmerk | Waarde |
---|---|
Type | Straight |
Inside Diameter Primary | 30mm |
Inside Diameter Secondary | 30mm |
Adhesive Lined | Yes |
Material | Modified Polyolefin |
Number of Breakouts | 1 |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +105 °C, +60 °C |
Shrunk Diameter Primary | 14.2mm |
Shrunk Diameter Secondary | 5.9mm |
Series | 202K1 |
- RS-stocknr.:
- 718-3118
- Fabrikantnummer:
- 202K132-3/42-0
- Fabrikant:
- TE Connectivity
- Moulded Boot Straight size 32
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.
- Installation of /225 Coated Straight and 90° Moulded Parts using a Hot Air Gun.