Schneider Electric uPVC 25mm Cable Trunking Outlet Box Breakaway Box Miniature PVC

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Socket Mounting Box with Adaptor

Ideal for both power and data outlets where more depth may be required for the fittings and cables. The 25mm depth surface mounting boxes allow 16´16 and 25´16mm trunking to be neatly secured to the boxes via the supplied manifold adaptor, which also allows the box to be mounted flush to the side of door architrave or fitted at floor or skirting board level.

Approvals

-

Specificaties
Kenmerk Waarde
Trunking Accessory Type Breakaway Box
Material UPVC
Height 25mm
Dimensions 25mm
Series Miniature PVC
30 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
3,188
(excl. BTW)
3,857
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 3,188
€ 15,94
50 - 245
€ 3,03
€ 15,15
250 +
€ 2,87
€ 14,35
*prijsindicatie
Related Products
DLP installation trunking with no central partition, supplied ...
Description:
DLP installation trunking with no central partition, supplied with 65 mm wide cover.Used with Mosaic plugs and support for 65 mm covers.The dividing and separating partitions allow partial covers to be put in place.The accessories allow a neat and very ...
Electrical trunking designed for distribution with high volumes ...
Description:
Electrical trunking designed for distribution with high volumes of receivers.Electrical distribution in workshops, industry, hypermarkets (checkout lines, refrigerated shelving etc.).Main power supply lines designed for distribution of lighting lines installed with Canalis KDP or KBA.
3-compartment mouldings designed for distribution of high and ...
Description:
3-compartment mouldings designed for distribution of high and low-power circuits.
White high impact PVC accessories, which can be ...
Description:
White high impact PVC accessories, which can be fitted to either standard or self-adhesive mini trunking. These accessories complete the installation whilst also reducing assembly/fixing times and ensure adequate mechanical protection as required by the IEE Wiring Regulations.