Mitutoyo 300mm Digital Caliper 0.01 mm, Metric With UKAS Calibration

  • RS-stocknr. 794-5537
  • Fabrikantnummer 551-331-10
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Mitutoyo-Absolute

Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.

General Features:

Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish

All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C

Electronic Features:

ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Note

Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section

Supplied with

SR44 Battery

Specificaties
Kenmerk Waarde
Caliper Type Digital
Capacity 300mm
Imperial or Metric Metric
Display Type Digital
Calibrated UKAS
Accuracy 0.04 mm
Resolution 0.01 mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 31-01-2020, met een levertijd van 1 werkdag.
Prijs Each
516,95
(excl. BTW)
625,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 516,95
Related Products
An electronic caliper with a 7mm high display ...
Description:
An electronic caliper with a 7mm high display for measurement of inside, outside and depth. Absolute features re-sets reference point of measurement taken by instrument jawsselect imperial or metric displayOrigin feature resets zero point of instrument. This point is memorised, ...
A dial caliper manufactured from hardened stainless steelThe ...
Description:
A dial caliper manufactured from hardened stainless steelThe dial rotates for zero adjustment and can be locked in positionThe scale has 0.02mm division1 pointer revolution = 2mmA thumbwheel offers ease of operation, a knurled lockscrew locks jaws if required.
An imperial/metric universal vernier caliper for internal and ...
Description:
An imperial/metric universal vernier caliper for internal and external measurements. Stainless steel hardened to HV500, for maximum wear resistanceSatin chrome finishKnurled thumbscrew slide lock.
Dial zero adjustment and lockKnurled thumb wheel for ...
Description:
Dial zero adjustment and lockKnurled thumb wheel for dial pointer movementJaw lock for repetitive Go/No Go readingsRack cover to prevent dirt/grit ingress.