Mitutoyo 200mm Digital Caliper, Metric

  • RS-stocknr. 833-6451
  • Fabrikantnummer 500-162-30
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

Mitutoyo-Absolute

Electronic calipers with an LCD display which will display in either ’metric/imperial (switchable)’ or ’metric only’ reading depending on model.

General Features:

Fully hardened stainless steel beam & jaws with an anti-glare, satin chrome finish

All measuring surfaces are ground and lapped for high accuracy
Capable of measuring: inside, outside, depth and step
Storage Temp: -10°C to +60°C
Operating Temp: 0°C to +40°C

Electronic Features:

ON/OFF - Switches unit on, display indicates distance of jaws from pre-set origin point
ABS - Absolute feature re-sets the ’reference’ point of measurement of the instrument jaws
in./mm - Selects imperial or metric display
Origin - Pre-sets the zero point of the instrument. This point is memorised even if the unit is switched off

Note

Imperial/metric versions have thumbwheel where metric does not.
SPC output versions - A connection port continually transmits data (MITUTOYO FORMAT). 1m/2m leads are available separately, see this section

Supplied with

SR44 Battery

Mitutoyo Digital Precision Caliper

The Mitutoyo 0 to 200mm range digital precision calliper is a highly accurate measuring instrument. It is enabled with a new age electromagnetic inductive sensor that repels dirt, oil, and water ensuring maximum accuracy. It has a function that starts the absolute-mode measurement without any zero-setting after it is switched on. The INC (incremental) measurement function enables the display value to be set to zero, temporarily, at the current slider position to enable easy incremental-mode measurement. The original position of the calliper can be set, or reset, with the ’origin' switch at any time. It has advanced functions like low battery alarm indication and carbide-tipped jaw that makes it ideal for various applications like measurement of rough-machined workpieces, castings, and grindstones.

Features and Benefits

• Step-measurement capable
• Battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo's absolute scale
• The slider configuration features an ergonomic, thumb-friendly
• Resolution of 0.01mm
• Accuracy of ±0.02 mm
• Button-type silver oxide battery power supply
• High response speed
• Font height is 9mm,alleviation of fatigue with the high-contrast LCD

Applications

• Mechanical engineering
• Aerospace industries
• Steel and other metalwork industry

Specificaties
Kenmerk Waarde
Caliper Type Digital
Capacity 200mm
Imperial or Metric Metric
Display Type Digital
Accuracy ±0.02 mm
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
17 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
223,55
(excl. BTW)
270,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 223,55
Kalibratie-opties
Related Products
High quality internal dial calipers capable of reading ...
Description:
High quality internal dial calipers capable of reading internal bores and recess diameters to a depth of 80mm. Black oxide finish caliper arms which have 1.59mm dia. steel balls on the measuring tipsChrome plated housing and bezelWith revolution counter.
1//50 mm precision callipers with rule and a ...
Description:
1//50 mm precision callipers with rule and a slider of tempered, stainless steel.Matte chrome rule and vernier.Reinforced measurement notches.Allows measurement of interior and exterior surfaces, as well as depths, with the gauge.Delivered with holder.Available in calibrated version.
Bahco vernier caliper. Precision caliper for accuracy in ...
Description:
Bahco vernier caliper. Precision caliper for accuracy in a wide range of measuring applications. Fully hardened stainless steel construction with an anti-glare. Measuring methods: inside, outside, depth and stepStainless steel constructionAnti-glareSuitable for general workshop and machine shop useReady to work ...
These feature hardened fulcrum studs which have a ...
Description:
These feature hardened fulcrum studs which have a large bearing surface to minimise side deflection. A quick release nut enables fast opening and closing of the calipers.RS Stock No: 224-5413 is an inside caliper.RS Stock No: 224-5429 is an outside ...