Microchip Technology MCP2562FD-H/MF, CAN Transceiver 8Mbit/s 1-Channel, 8-Pin DFN

  • RS-stocknr. 177-1631
  • Fabrikantnummer MCP2562FD-H/MF
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The MCP2561/2 is Microchip Technology Inc. second generation high-speed CAN transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The device family members are: • MCP2561 with SPLIT pin • MCP2562 with VIO pin

Supports 1 Mb/s operation
Implements ISO-11898-5 standard physical layer requirements
Very low standby current (Typ: 5μA)
VIO supply pin (MCP2562) to interface directly to CAN controllers and microcontrollers with 1.8V to 5V I/O
SPLIT output pin (MCP2561) to stabilize common mode in biased split termination schemes
CAN bus pins are disconnected when device is unpowered. An unpowered node or brown-out event will not load the CAN bus
Detection of ground fault, Permanent dominant detection on TXD, Permanent dominant detection on bus
Power-on Reset and voltage brown-out protectionon VDD and VIO pin

Specificaties
Kenmerk Waarde
Maximum Data Rate 8Mbit/s
Number of Transceivers 1
Power Down Mode Normal, Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type DFN
Pin Count 8
Dimensions 3 x 3 x 0.95mm
Length 3mm
Width 3mm
Height 0.95mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
Automotive Standard AEC-Q100
240 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Tube of 120)
0,961
(excl. BTW)
1,163
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
120 +
€ 0,961
€ 115,32
*prijsindicatie
Related Products
The KSZ9897 is a fully integrated layer 2, ...
Description:
The KSZ9897 is a fully integrated layer 2, managed, seven-port gigabit Ethernet switch with numerous advanced features. Five of the seven ports incorporate 10/100/1000 Mbps PHYs. The other two ports have interfaces that can be configured as SGMII, RGMII, MII ...
The KSZ8864RMN is a highly-integrated, Layer 2 managed ...
Description:
The KSZ8864RMN is a highly-integrated, Layer 2 managed 4-port switch with optimized design, plentiful features and smallest package size. It is designed for cost-sensitive 10/100Mbps 4-port switch systems with on-chip termination, lowest-power consumption, and small package to save system cost. ...
Microchip’s LAN9311 is a 2 Port Ethernet Switch ...
Description:
Microchip’s LAN9311 is a 2 Port Ethernet Switch IC that combines all the functions of a 10/100 switch system into one device. Integrated on-board is a high performance Switch Fabric, Packet Buffers, Buffer Manager, MACs, PHY Transceivers and a Host ...
The DG2517E is low-voltage dual single-pole / double-throw ...
Description:
The DG2517E is low-voltage dual single-pole / double-throw monolithic CMOS analog switches. Designed to operate from 1.8 V to 5.5 V power supply, the DG2517E achieves a bandwidth of 221 MHz while providing low on-resistance (2.5 ), excellent on-resistance matching ...