BALLUFF Capacitive sensor 1 → 20 mm length 40mm PNP-NO supply voltage 10 → 30 V dc IP67

  • RS-stocknr. 902-7473
  • Fabrikantnummer BCS Q40BBAA-PSC20C-EP00,3-GS49
  • Fabrikant BALLUFF
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HU
Productomschrijving

BCS DC 3 Wire Flush Block Capacitive Sensors

BCS capacitive sensors monitor and detect stack heights and levels as well as the presence of objects and content in glass, plastic or paper packages all with extreme precision. The BCS range are unaffected by dust, surface reflections or any object composition such as colour or texture. Capacitive sensors can also detect levels of solids or liquids with reliability through glass and plastic walls. This diverse series consists of high temperature and pressure ratings with stainless steel and PTFE housings for harsh environments.

DC3 wire
Block design
Short circuit protected
Polarity reversal
LED
IP67

Approvals

IP 67

Block Style

Flush mounting, embeddable sensors with IP67 protection and an operating temperature range of -25 to +75°C. All have short circuit and reverse polarity protection and provide an LED indication of the on/off status.

Specificaties
Kenmerk Waarde
Body Style Block
Output Type PNP-NO
Detection Range 20 mm
Supply Voltage 10 → 30 V dc
Terminal Type Cable
IP Rating IP67
Maximum DC Voltage 30V
Mounting Style Flush
Length 40mm
Width 40mm
Depth 10mm
Switching Current 100 mA
Minimum Operating Temperature -5°C
Dimensions 40 x 40 x 10 mm
Reverse Polarity Protection Yes
Maximum Operating Temperature +85°C
Shielding Shielded
Short Circuit Overload Protection Yes
Housing Material PBT
Switching Frequency 100 Hz
Standards Met CE, CULus Listed
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
10 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
57,91
(excl. BTW)
70,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 57,91
Related Products
Capacitive sensors can also be used to detect ...
Description:
Capacitive sensors can also be used to detect non metallic materials i.e. plastic, paper, fluids etc. Can be used for the detection of levels, or as a hand-held switch. Stainless steel housing with PBT sensing faceSenses a wide variety of ...
BCS capacitive sensors monitor and detect stack heights ...
Description:
BCS capacitive sensors monitor and detect stack heights and levels as well as the presence of objects and content in glass, plastic or paper packages all with extreme precision. The BCS range are unaffected by dust, surface reflections or any ...