RS PRO, 10A Cartridge Fuse, 12.7 x 29mm

Wetgeving en compliance
Land van herkomst: GB

RS PRO "Pull cap" Cartridge Fuses

These RS PRO cartridge fuses are general purpose fuse links ideal for protecting circuits in areas such as industrial installations. These fuses have a rated voltage of 415 V ac and are suitable for use on systems with voltages up to 457 V ac.
Fuses are less expensive and react faster than a circuit breaker. However circuit breakers can be reset after they trip but a fuse will have to be replaced once it blows.
RS PRO cartridge fuse packs are available in a range of current ratings with varying resistance values to suit all your requirements. This range is reliable for a broad range of applications.
This range includes the following types with current ratings 2A to 32A:
413-787 2A
413-793 4A
413-800 6A
413-816 10A
413-822 16A
413-838 20A
413-844 25A
413-850 32A


Breaking Capacity 80kA at 415V ac, 40kA at 250V dc
Fusing Factor Class Q1 (approx. 1·5)
BS 88 1975 and ASTA certified
Cylindrical shape
Suitable fuse holders include: 184-9272 and 184-9294
Voltage rating: 415 V ac
High breaking capacity
Easily replaced
Size Designations: BS88

Typical applications:
These fuses can be used to protect circuits with high faults levels such as:
Industrial installation
Cable protection
General purpose

Additional Information

What size is it?
12.7mm x 29mm

What are fuses used for?
• For the protection of components and equipment from costly damage caused by overcurrent
• To isolate sub-systems from the main system once a fault has appeared

What is an overcurrent?
It is a setting where a circuit experiences a current that is higher than the normal operating current.

What is Breaking Capacity?
Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit.

Kenmerk Waarde
Current Rating 10 A
Fuse Size 12.7 x 29mm
Voltage Rating 415 V ac
Application Category GG
Series MD
700 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 3,385
€ 33,85
100 - 240
€ 3,182
€ 31,82
250 - 490
€ 2,911
€ 29,11
500 - 990
€ 2,64
€ 26,40
1000 +
€ 2,37
€ 23,70
Related Products
The Schurter SHT 6.3x32 cartridge fuse has a ...
The Schurter SHT 6.3x32 cartridge fuse has a ceramic cylindrical body with a 500VAC/400VDC 10A rating. It has a nickel-plated copper alloy endcaps on both the sides and tin-plated copper axial leads in it. • Ambient temperature ranges between -40°C ...
SIBA ceramic cartridge fuses can be fitted with ...
SIBA ceramic cartridge fuses can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. These fuses are ultra-rapid which are ideal for power semiconductors such as diodes, thyristors and triacs, they separate ...
Lawson Type 'ME' and 'MF' fuse links are ...
Lawson Type 'ME' and 'MF' fuse links are for use in single or three phase house service cut-outs or similar installations. The standardised BS 1361 breaking capacity of these fuse-links is 33kA at 0.3p.f. However to cater for increasing fault ...
Our range of products is available for domestic ...
Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards.What material are these ...