Cooper Bussmann, 1A Ceramic Cartridge Fuse, 14 x 51mm

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: ES
Productomschrijving

IEC Cylindrical Fuses

Our range of products is available for domestic applications. These ceramic fuses are also available with an optional visual indicator. Fuse links comply with IEC60269-1, 60269-3, 60269-3-1 and also meet the requirements of NF and UNE standards.

What material are these made from?

All series of cylindrical fuse links have ceramic bodies and silverplated copper end caps.

Why choose ceramic cartridge fuse?

Ceramic and glass cartridge fuses have similar properties. The capacity of a ceramic cartridge fuse is higher than other fuses, which means that ceramic fuses can be used in circuits that have a higher current. They are perfect for protecting against overheating.

What size is it?

Sizes 8 x 32 mm, 10x38 mm, 14x51 mm & 22x58 mm in both Class gL-gG and aM are also available with a built-in striker for micro-switch operation and remote indication. Class gL-gG and aM fuse links are intended for industrial applications. All industrial fuse links are available with an operated visible fuse indicator.

What voltage is it?

This range of cylindrical fuses links is available in a wide selection of physical sizes and current ratings for applications where the system voltage is 400, 500 and 690 Volts AC.

What is Breaking Capacity?

Breaking capacity is the level of current that the fuse can safely handle without exploding or breaking. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit.

What are fuses used for?

• For the protection of components and equipment from costly damage used by over-current
• To isolate sub-systems from the main system once a fault has appeared

What is on overcurrent?

It is a setting where a circuit experiences a current that is higher than the normal operating current.

Specificaties
Kenmerk Waarde
Current Rating 1 A
Fuse Size 14 x 51mm
Voltage Rating 690 V ac
Body Material Ceramic
Application Category GG - gL
Series C14G
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
90 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,344
(excl. BTW)
1,626
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 1,344
€ 13,44
100 - 190
€ 1,277
€ 12,77
200 - 490
€ 1,183
€ 11,83
500 +
€ 1,129
€ 11,29
*prijsindicatie
Verpakkingsopties
Related Products
The Schurter SHT 6.3x32 cartridge fuse has a ...
Description:
The Schurter SHT 6.3x32 cartridge fuse has a ceramic cylindrical body with a 400VAC/63VDC 20A rating. It has a nickel-plated copper alloy endcaps on both the sides and tin-plated copper axial leads in it. • Ambient temperature ranges between -40°C ...
Schurter professional range of minature time-lag glass fuses, ...
Description:
Schurter professional range of minature time-lag glass fuses, suitable for a wide variety of applications. Time-delay fuses, size 6.3 x 32 mm.Low breaking capacity.Glass cartridge, protected terminals.
Schurter SHF series cartridge fuse characterise of high ...
Description:
Schurter SHF series cartridge fuse characterise of high breaking capacity of 1500 A and overcurrent protection up to 500 VAC. The SHF 6.3x32 series has a compact size making them ideal for primary protection of 3-phase system applications as well ...
SIBA ceramic cartridge fuses can be fitted with ...
Description:
SIBA ceramic cartridge fuses can be fitted with or without a built-in striker pin for fuse blown indication or operation of microswitches. These fuses are ultra-rapid which are ideal for power semiconductors such as diodes, thyristors and triacs, they separate ...