36 W Fluorescent Anticorrosive Light Fitting Single Batten, 230 V, 1 Lamp, Anti-corrosive, 1312 x 102 x 108 mm

  • RS-stocknr. 823-4854
  • Fabrikantnummer 45333
  • Fabrikant Sylvania
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: BE
Productomschrijving

Sylvania Hydroproof Corrosion Resistant T8 Luminaires

The Sylvania Hydroproof T8 electronic / switch start range of IP67 anti-corrosive / corrosion resistant luminaires are designed for the most challenging environments and offer unequalled chemical resistance.

Body made from extremely resistant glass-reinforced polyester (SMC)
Flat upper surface to help prevent buildup of dust or liquids
Protected against chemicals
User-friendly and long lasting materials
Diffuser made from high grade polymethylmathacrylate (PMMA) with internal prisim system for high light output and broad light dispersion with minimal glare
Stainless steel closure clips ensure permanent pressure between diffuser and housing to guarantee IP rating
Sealing gasket in high-density polyurethane to ensure maximum waterproof properties of the fixture
The Light Fitting doesn't include a Lamp, this should be purchased separately

Specificaties
Kenmerk Waarde
Type Single Batten
Length 1.312 m
Width 102 mm
Depth 108 mm
Wattage 36 W
Number of Lamps 1
Lamp Type Fluorescent
Lamp Size T8
Voltage Rating 230 V
Anti-corrosive Yes
IP Rating IP67
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 18-02-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
75,03
(excl. BTW)
90,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 75,03
Related Products
This Thorlux Lighting High ambient temperature Lamp Batten ...
Description:
This Thorlux Lighting High ambient temperature Lamp Batten is a British Made multipurpose luminaire of high quality construction, in a non yellowing white finish. This Lamp batten is robust and durable, with a polycarbonate cover and extruded aluminium body with ...
High frequency electronic 58W 5 foot (1610mm total ...
Description:
High frequency electronic 58W 5 foot (1610mm total length) twin fluorescent fittings for surface mounting or suspension. Available in white (701-3744) or grey (701-3735). Requires 2 x 58W T8 fluorescent tubes (not supplied)Lux Levels: 510Lux at 1m and 250Lux at ...
The IP67 Linear LED bulkhead replaces the T5/T8 ...
Description:
The IP67 Linear LED bulkhead replaces the T5/T8 5 foot fluorescent. Applications include industrial lighting, car parks, warehouses, subways, tunnels and food industry and can be used in areas where dust and water are present. The unit uses significantly less ...
RS PRO IP65 LED surface mounted, non-corrosive fitting ...
Description:
RS PRO IP65 LED surface mounted, non-corrosive fitting features ABS base, polycarbonate controller, stainless steel clips and is supplied with suspension eyes and stainless steel mounting bracket. The lighting fitting consumes up to 40% less energy than traditional light fittings, ...