Xylem Jabsco 10 bar Electric Central Heating Pump, 2.7m Head, 1/2 in BSP

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Xylem Jabsco DC Pump

The Xylem Jabsco electric central heating DC pump is the latest innovation used wherever a highly efficient circulation pump is needed without a direct connection to AC power. This magnetically coupled impeller pump is characterised by its small size, high-efficiency, and very low power consumption. The shaft-less, spherical, EC, commutated motor enables a long, maintenance-free, and quiet service life.
The housing of the pump is made of brass. It has a 1/2in female thread connection.

Features and Benefits


The supply voltage ranges between 8VDC and 24V
DC
• Maximum working pressure is 10bar
• Maximum pumping head of 2.7m
• Fluid temperature range is between -10°C and 95°C
• Steeples speed controller
• Energy saving

Applications


Circulating systems in industrial or medical field
• Computer and laser cooling
• Hot water heating in a mobile home or boat
• Ponds and aquariums
• Domestic hot water systems and automotive heaters.

Circulators

Specificaties
Kenmerk Waarde
Power Supply Type Electric
Maximum Head 2.7m
Maximum Working Pressure 10 bar
Connection 1/2 in BSP
Housing Material Brass
Maximum Temperature +95°C
Minimum Temperature -10°C
Supply Voltage 8 → 24 V
Thread Size 1/2in
Thread Standard BSP
Fluid Temperature Range -10 → +95°C
3 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
282,31
(excl. BTW)
341,60
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 282,31
Related Products
Pump control, Alternating/parallel. Alternated access of two pumps ...
Description:
Pump control, Alternating/parallel. Alternated access of two pumps or other devicesEven distribution of dutyParallel duty at high demand Operation using 1 or 2 input signals (two modes of operation)Timing offset of the two loads to avoid water hammer effcectsSupply voltage ...
Features a differential pressure switch, dry running cut-out, ...
Description:
Features a differential pressure switch, dry running cut-out, control panel, pressure reservoir and non-return valveStart up pressure 0.5 to 3.5 bar minimum, adjustableDifferential pressure switch controls water pressure in pumped systems and ensures constant flowHelps to prevent boiler cycling and ...
Fits to pump body or pipe work (pipe ...
Description:
Fits to pump body or pipe work (pipe diameter 20 to 200mm)A rapid rise past the set-point temperature of 45°C (if the inlet water level falls below the centre line of the inlet) of any centrifugal type pump, will cause ...
For use in the chemical, pharmaceutical and food/drinks ...
Description:
For use in the chemical, pharmaceutical and food/drinks industries. All have IP65 glass fibre reinforced housings, solenoid drive mechanisms and LCD displays. A comprehensive user manual is supplied with each model.