Ceramic Heating Element, 245mm, 1 kW, 230 V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Ceramic Heating Elements

These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC

5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for monitoring and control
Heating wire embedded into concave shaped heater creates infrared in parallel rays
230V ac supply
Suitable for long wave radiation, curing, heating and drying
Thermocouple included with RS Stock Numbers - 376-2688, 376-2694 and 376-2701

Note

Stock Item 376-2672 has a built in Thermocoupler and is 4 wire.

Multi-Purpose Process Heaters

In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.

Warning

  • These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Specificaties
Kenmerk Waarde
Heating Element Form Curved Ceramic Element
Power Rating 1 kW
Supply Voltage 230 V ac
Length 245mm
Width 60mm
Thickness 31mm
Dimensions 245 x 60 x 31 mm
15 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
62 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
47,51
(excl. BTW)
57,49
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 47,51
5 - 9
€ 46,10
10 +
€ 44,20
Related Products
These heating elements are extremely energy efficient converting ...
Description:
These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC. 5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for ...
Formable heating resistors can take on any shape ...
Description:
Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.The internal bend radius is 8 mm for the ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. 230V ac supply voltage Two M5 x 30mm mounting bolts on the rear7mm leadsSuitable for medium wave infrared ...
Suitable for direct immersion or as a source ...
Description:
Suitable for direct immersion or as a source of conducted, convected or radiant heat. They are supplied in straight lengths in an annealed condition and can be formed into complex shapes using simple bending tools. Efficient, robust and long lastingIncoloy ...