Machinable Glass Ceramic Material Kit (Plate, Rod, Square Bar), +800°C

  • RS-stocknr. 158-3203
  • Fabrikant MACOR
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Macor® Machinable Glass Ceramic

Macor® is a registered trademark of Corning Inc.

For the manufacture of precision components utilising ordinary metalworking tools
No post firing required
Non-wetting, 0% porosity and no deformation
Max no load temperature: 1000°C
Continuous operating temperature: 800°C
Machining tolerances approach 0.013mm (polished smoothness of 0.013mm is achievable)
Can be sealed and joined to itself and to other materials
White in colour

Note

Trial pack (RS Stock number 158-3203) contents: 1 of 10dia x 50mm Rod, 1 of 10x10x25mm Sq Bar, 1 of 25x50x3mm Sheet

Specificaties
Kenmerk Waarde
Material Machinable Glass Ceramic
Included Forms Plate, Rod, Square Bar
Colour White
Thermal Conductivity 1.46W/mK
Density 2.52g/cm³
Water Absorption 0%
Compressive Strength 35kg/mm²
Hardness A 48 Rockwell
Fracture Toughness 1.53MPa
Maximum Operating Temperature +800°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 23-10-2020, met een levertijd van 1 werkdag.
Prijs Each
61,28
(excl. BTW)
74,15
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 61,28
3 - 5
€ 57,00
6 - 11
€ 53,93
12 +
€ 49,01
Related Products
Ball shaped door lock that works with RS ...
Description:
Ball shaped door lock that works with RS structural systems. The clamp is fitted to a door frame and the ball should be connected to the door. Consistent performance at over 20,000 cyclesCan be used for shutter or sliding doors. ...
The AVR Butterfly Evaluation Kit is an evaluation ...
Description:
The AVR Butterfly Evaluation Kit is an evaluation tool demonstrating the capabilities of the ATmega169. The tool is shipped with preloaded firmware supporting temperature sensing, light measurement, voltage readings, music playback and nametag display. Applications include building automation (comfort and ...
The STEVAL-ISQ014V1 product evaluation board implements low-side current ...
Description:
The STEVAL-ISQ014V1 product evaluation board implements low-side current sensing which consists in placing a sense resistor between the load and the circuit ground. The resulting voltage drop is amplified using a TSZ121 op amp. The common mode voltage is close ...
PRECISION BRAND Brass Shim Stock is a half ...
Description:
PRECISION BRAND Brass Shim Stock is a half hard,cold rolled, CDA 260 AlloyRockwell Hardness:30T 56-68Meets SAE-CA-260, CDA 260, ASTM B-19 & B-36Tensile strength: 57-67,000 p.s.i.Elongation: 18 to 42% in 2"