Machinable Glass Ceramic Rod, 100mm x 40mm diameter

  • RS-stocknr. 225-5511
  • Fabrikant MACOR
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Macor® Machinable Glass Ceramic

Macor® is a registered trademark of Corning Inc.

For the manufacture of precision components utilising ordinary metalworking tools
No post firing required
Non-wetting, 0% porosity and no deformation
Max no load temperature: 1000°C
Continuous operating temperature: 800°C
Machining tolerances approach 0.013mm (polished smoothness of 0.013mm is achievable)
Can be sealed and joined to itself and to other materials
White in colour

Note

Trial pack (RS Stock number 158-3203) contents: 1 of 10dia x 50mm Rod, 1 of 10x10x25mm Sq Bar, 1 of 25x50x3mm Sheet

Specificaties
Kenmerk Waarde
Material Machinable Glass Ceramic
Form Rod
Length 100mm
Rod Diameter 40mm
Colour White
Thermal Conductivity 1.46W/mK
Density 2.52g/cm³
Hardness A 48 Rockwell
Compressive Strength 35kg/mm²
Fracture Toughness 1.53MPa
Water Absorption 0%
Maximum Operating Temperature +800°C
8 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
275,78
(excl. BTW)
333,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 275,78
3 - 9
€ 256,47
10 - 29
€ 242,68
30 +
€ 220,62
Related Products
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light. Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long ...
Description:
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long term to hot water (60°C)High storage stiff thermoplasticExcellent sliding properties/wear and abrasion resistantAcid, solvent and chemical resistantFor all bearing, bush, gear, insulator applicationsOpaque.
Black PEEK modified with the addition of carbon, ...
Description:
Black PEEK modified with the addition of carbon, graphite and PTFE to offer optimised properties for demanding bearing and friction requirements. Good sliding properties even without lubrication/high wear resistanceHigh thermal mechanical bearing strengthGood chemical/radiation (gamma) resistanceVery rigid/high ...