EPCOS 8V 150A 0.3J 17V Clamp 1206 Metal Oxide Varistor

  • RS-stocknr. 775-2874
  • Fabrikantnummer CT1206M4G
  • Fabrikant EPCOS
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: HR
Productomschrijving

Metal Oxide Varistors CT Series

Surface mount chip varistor

Nickel barrier termination

Specificaties
Kenmerk Waarde
Varistor Voltage 8V
Maximum DC Voltage Rating 5.5V
Maximum AC Voltage Rating 4V
Energy 0.3J
Clamping Voltage 17V
Clamping Current 1A
Package/Case 1206 (3216M)
Maximum Surge Current 150A
Capacitance 1.5nF
Dimensions 3.2 x 1.6 x 1.7mm
Depth 1.6mm
Length 3.2mm
4400 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 50)
0,28
(excl. BTW)
0,34
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
€ 0,28
€ 14,00
250 +
€ 0,238
€ 11,90
*prijsindicatie
Verpakkingsopties
Related Products
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. ...
Description:
Multilayer semi-conducting ceramic construction providing bi-directional voltage clamping. Suppression of inductive switching or other fast electrical transient events makes these devices useful in helping to achieve electromagnetic compliance of end products. Suitable for on-board transient voltage protection of ...
The Bourns MOV-14D Series of 14 mm radial ...
Description:
The Bourns MOV-14D Series of 14 mm radial leaded varistor devices protects against over voltage transients such as lightning, power contact and power induction.The devices have a high current handling, high energy absorption capability and fast response times to protect ...
Construction:Round varistor element, leadedCoating: epoxy resin, flame-retardant Terminals: ...
Description:
Construction:Round varistor element, leadedCoating: epoxy resin, flame-retardant Terminals: tinned wireFeatures:High-energy SuperioR series E4Wide operating voltage range 130 … 750 VRMSAll types duty cycle @ 6 kV/ 3 kA = >10 pulsesVery high surge current rating up to 20 kA.
Almost no energy consumption in stand-by modeAfter a ...
Description:
Almost no energy consumption in stand-by modeAfter a surge impulse the varistor works immediately in normal mode so there is no slip currentExcellent absorption at surge impulsesOperating temperature:–40 ºC to +85 ºC for types up to 95 VRMS–40 ºC to ...