Unistrut Galvanised Steel/Stainless Steel 3m Channel Splice Support 1.91kg/m, Fits Channel Size 21 x 41mm

  • RS-stocknr. 732-1694
  • Fabrikantnummer P3300
  • Fabrikant Unistrut
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

Galvanised Channels, 3m length

Introducing the range of galvanised channels from Unistrut. These channels have been specially designed as support systems for mechanical, electrical and plumbing installations which can be attached to existing steelwork or concrete inserts, or directly into walls, ceilings, and floors. The range comes in galvanised steel or stainless steel, and in either plain or slotted channel formats (10 x 25 slots on 50 pitch). The 3m length channel is compatible with Unistrut’s Metal Framing System accessories for quick and easy assembly, reducing the amount of time spent on assembly.

Features and Benefits:

• Slots are sized for a inch threaded rod or fastener
• Material thickness is 2.5mm and the internal slot width is 22mm
• Plain or slotted channels are available, dependant on requirement
• Ideal for installation of wiring, plumbing and mechanical components
• 3m in length

Applications:

Unistrut’s P1000T range is the original framing strut bracket and has been used in countless applications for over 90 years. It is more commonly known as a 12 Gauge Standard or Deep Slotted Channel.

The channel is mostly used for seismic bracing, ceiling grids, pipe, duct, and cable tray supports, trapeze supports and other general framing applications. This particular channel is most suitable for use by electrical and mechanical contractors for pipework or ducting.

Does it come with screws?

No

Note

Material thickness for all channel types is 2.5mm, and internal slot width is 22mm for the galvanised steel channels and 21mm for stainless steel types.

Unistrut Channel Splice Supports

The Unistrut Channel Splice Supports have been specially designed as support systems for mechanical, electrical and plumbing installations. It can be attached to existing steelwork or concrete inserts, or directly into walls, ceilings, and floors. The range comes in galvanised steel or stainless steel, and in either plain or slotted channel formats (10 x 25 slots on 50 pitch). The 3m length channel is compatible with Unistrut's Metal Framing System Accessories for quick and easy assembly, reducing the amount of time spent on assembly.

Features and Benefits

• Slots are sized for an inch threaded rod or fastener
• Plain or slotted channels are available, dependant on the requirement
• Ideal for installation of wiring, plumbing and mechanical components
• Length is 3m
• Fit channel size is 21x41mm

Applications

• Seismic bracing
• Ceiling grids
• Pipe
• Duct and cable tray supports
• Trapeze supports
• General framing applications
• This particular channel is most suitable for use by electrical and mechanical contractors for pipework or ducting

Specificaties
Kenmerk Waarde
Fits Channel Size 21 x 41mm
Length 3m
Material Galvanised Steel/Stainless Steel
Weight Per Item 1.91kg/m
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
50 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 2)
31,98
(excl. BTW)
38,70
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 +
€ 31,98
€ 63,96
*prijsindicatie
Related Products
Spring zeb channel nuts, which incorporate a spring ...
Description:
Spring zeb channel nuts, which incorporate a spring to aid positioning prior to assembly, available in either stainless or galvanised steel. Channel nut with springThreads on the nuts are metric.
Galvanised steel splice sections to enable channels to ...
Description:
Galvanised steel splice sections to enable channels to be joined end-to-end, supplied with BZP steel fixing screws.
Cone-point M10 x 40 Set Screws available in ...
Description:
Cone-point M10 x 40 Set Screws available in 8.8 grade high-tensile steel or A4 grade stainless steel.