RS PRO 6VA 2 Output Chassis Mounting Transformer, 6V ac

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: PL
Productomschrijving

Chassis Mount Clamp & Frame Construction 115/230Vac Primary Transformer

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps 6VA to 50VA
Multi-hole frame fixing 100VA
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

Note

Suitable transformer shrouds: 6VA = 503-912 ; 12 & 20VA = 504-004 ; 50, 75 & 100VA = 503-928

Approvals

8888

Standards

BS3535; EN 60 742

Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA

Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Specificaties
Kenmerk Waarde
Primary Voltage Rating 115V ac, 230V ac
Secondary Voltage Rating 6V ac
Power Rating 6VA
Number of Outputs 2
Mounting Type Clamp Mount
Length 45mm
Width 40mm
Depth 37mm
Dimensions 45 x 40 x 37mm
Fixing Hole Diameter 4 x 5.5mm
Weight 200g
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
27 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
10,95
(excl. BTW)
13,25
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 10,95
10 - 24
€ 9,83
25 - 49
€ 9,04
50 - 99
€ 8,31
100 +
€ 7,65
Related Products
High quality safety and isolating transformers designed for ...
Description:
High quality safety and isolating transformers designed for use in control circuits and general applications Low loss noise laminations Dual standard primary winding 230 / 400Vac with +15V tap for input flexibility Dual secondaries are centre tapped. Earth terminal provided ...
RS Pro high-quality panel isolation transformers are designed ...
Description:
RS Pro high-quality panel isolation transformers are designed for use in general applications. These single phase transformers feature screw connectors for multiple input and brackets for screw fixing or for DIN Rails. They have a standard primary winding 0-230-400VAC with ...
Single-phase control and signalling transformers (50 → 60 ...
Description:
Single-phase control and signalling transformers (50 → 60 Hz - class 1).Active parts protected by cover up to 1000 VA.Mounting on full or perforated platinum, or rail according to power.Direct mounting possible on symmetrical DIN rail up to 250 VA.More ...
IP20 independent electronic transformers for halogen lamps. Class ...
Description:
IP20 independent electronic transformers for halogen lamps. Class II protection against electric shockProtected against overheating, voltage spikes and overloadsSecure the transformer using inbuilt screw slots.