- RS-stocknr.:
- 504-773
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 504-773
- Fabrikant:
- RS PRO
Wetgeving en compliance
- Land van herkomst:
- PL
Productomschrijving
Chassis Mount, Clamp Construction, 230Vac, 6VA to 50VA
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.
Features and Benefits
"Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds (example 503-912 )
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742"
Chassis mounting low voltage mains transformers with a single 230Va.c. 50/60Hz primary winding. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.
Features and Benefits
"Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps
Solder tag terminations
Optional terminal shrouds (example 503-912 )
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742"
Standards
BS3535; EN 60 742
Specificaties
Kenmerk | Waarde |
---|---|
Primary Voltage Rating | 230V ac |
Secondary Voltage Rating | 15V ac |
Power Rating | 6VA |
Number of Outputs | 2 |
Mounting Type | Clamp Mount |
Length | 45mm |
Width | 40mm |
Depth | 37mm |
Dimensions | 45 x 40 x 37mm |
Fixing Hole Diameter | 4 x 5.5mm |
Weight | 200g |
Minimum Operating Frequency | 50Hz |
Maximum Operating Frequency | 60Hz |