Megger 1002-224 Calibration Check Box, Test Type Continuity, Insulation, Loop, PFC, RCD

  • RS-stocknr. 480-291
  • Fabrikantnummer 1002-224
  • Fabrikant Megger
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Megger MTB7671 Test Box

Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations.

Tests the full range of a testers capability.
Does not trip RCD protected circuits.
Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.
Checks insulation, continuity, loop, PFC & RCD functions.
The test box is protected by a 30 mA RCD to ensure any faulty testers cannot cause an unsafe situation.
Check of any voltage measurement ranges on the instrument.
Colour coded test functions.
Meets the safety requirements of IEC61010.
Dimensions: 320 x 280 x 100mm.
Weight: 2.2kg.

Note

Additional history cards & test labels are available see stock no. 480-302

Supplied with

10 history cards and 160 “Instrument tested” labels, manual & Calibration Certificate produced and dated at time of manufacture.

Specificaties
Kenmerk Waarde
Test Type Continuity, Insulation, Loop, PFC, RCD
Includes History Card x 10, Label
Dimensions 320 x 280 x 100mm
Weight 2.2kg
Height 100mm
Length 320mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature 0°C
Width 280mm
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
695,00
(excl. BTW)
840,95
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 695,00
Kalibratie-opties
Related Products
The WKE junction box from Spelsberg is designed ...
Description:
The WKE junction box from Spelsberg is designed for industrial and emergency systems and provides up to 90 min of fire protection. Orange halogen-free Duroplastic enclosureHigh temperature-proof ceramic terminalsFlexible cable entriesExternal mounting brackets for quick installationOptional mounting on cable ...
Introducing a new range of ATEX certified junction ...
Description:
Introducing a new range of ATEX certified junction boxes from CE-TEK. All the boxes in the range incorporate factory fitted DIN Rail mounted, terminal connector blocks and are pre-punched with M20/ M25 cable gland entry apertures (each supplied with EX ...
Introducing the range of OTB junction boxes from ...
Description:
Introducing the range of OTB junction boxes from Bartec. Manufactured of high impact resistance, glass-fibre reinforced polyester SMC & DMC providing extraordinary stability and corrosion resistance. The standard enclosure consists of black, antistatic material. All OTB junction boxes have been ...
The Scame Zenith P series terminal box is ...
Description:
The Scame Zenith P series terminal box is an increased safety GRP enclosure suitable for applications in hazardous environments. This terminal box is manufactured from a 4mm, thick, black GRP and is corrosion-proof. This makes it suitable for LSOH applications.Note:Boxes ...