JG Speedfit POM Double Non Return Valve

  • RS-stocknr. 754-987
  • Fabrikantnummer 15DCV
  • Fabrikant JG Speedfit
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Double Check Valve

Prevents contamination of water arising from back siphoning, backflow or cross connection
15mm connection only

Approvals

WRAS

Approvals

WRC

SpeedFit Push-in Fittings, Valves & Taps

Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar at 65°C.Unsuitable for use with stainless steel pipe.

Specificaties
Kenmerk Waarde
Type Double
Body Material POM
Maximum Working Pressure 12 bar
36 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
15,45
(excl. BTW)
18,69
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 15,45
5 - 9
€ 14,96
10 +
€ 14,48
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
The John Guest system of push-in fittings and ...
Description:
The John Guest system of push-in fittings and pipe, designed for use with air, provide the ideal connection from compressor receiver to air line service components through to complete ring main and take off points. Time efficient, no nonsense one ...
A 240V two port zone valve for use ...
Description:
A 240V two port zone valve for use in heating systems to isolate zones or equipment. Powered open with spring return. Easy to use, clip-on detachable headPre-moulded plug and play cable supplied to connect to motorised headMetal manual operating lever ...
Applications: SteamMin. Set pressure 0.2 bargOverpressure 10%Blowdown Gases ...
Description:
Applications: SteamMin. Set pressure 0.2 bargOverpressure 10%Blowdown Gases 10%, liquids 20%Connections: Threaded BSP / NPTDischarge coefficients k= 0.55 for gases, k= 0.48 for liquidsDesign EN-12516-1, EN-4126-1/7DIN 259 and ANSI B2.1Rating PN-40Material Stainless steel 316LMaterials ENTemperature range -10 → ...