Seeit PIC-01 PIC-01, PIC Microcontroller Programmer RS-232 for EEPROM 24Cxx, PIC12Fxxx, PIC16Cxxx, PIC16Fxxx, PIC18Fxxxx

  • RS-stocknr. 454-6752
  • Fabrikantnummer PIC-01
  • Fabrikant Seeit
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: FR
Productomschrijving

Seeit PIC Microcontrollers Programmer

The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).
Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 and 40 pins.
It is equipped with a true RS-232 interface for connection to the serial port (cable supplied) compatible with any PC.
Accepts files in BIN, HEX, H8, H16 and EEP formats
Program editing in the buffer
Functions include read, program, blank test and erase.
Configuration registers of the processor can be edited.
The programmer works with Windows 95/98/ME/NT/2000/XP operating system

Note

Requires a 12V DC unregulated or 16V regulated power supply

Supplied with

- A programmer (ISO9002 compliant)
- A computer serial extension cable
- Software
- Instruction manual

PC Based Programmers

Specificaties
Kenmerk Waarde
Accessory Type PIC Microcontroller Programmer
For Use With EEPROM 24Cxx, PIC12Fxxx, PIC16Cxxx, PIC16Fxxx, PIC18Fxxxx
Interface Serial RS-232
Programmer Name PIC-01
Memory Type Programmed EEPROM
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
55,28
(excl. BTW)
66,89
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 55,28
Related Products
The CCS LOAD-n-GO is a hand-held mobile In-Circuit ...
Description:
The CCS LOAD-n-GO is a hand-held mobile In-Circuit Serial Programmer (ICSP) that offers a quick and easy 2-step solution for the in-the-field programming of PIC Microcontrollers. The device can store up to four separate firmware images or programs utilising 2 ...
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C ...
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs ...
Description:
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and ...