MPLAB PM3 universal device programmer

  • RS-stocknr. 517-2661
  • Fabrikantnummer DV007004
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

MPLAB PM3 Universal Device Programmer

Microchips DV007004 or more commonly known, MPLAB PM3 is a brilliant and easy to use stand-alone unit or PC operated device programmer. MPLAB PM3 is designed to program Microchips range of PIC devices. Not to mention, this device can program the latest dsPIC DSC devices too. The interface features 3 quick easy ports (2x Socket modules and 1x ICSP connector) to allow you to program on the fly.

The MPLAB PM3 contains 3 modes. PC Host for full control, stand-alone programming and safe mode to allow you to program almost anywhere at a fast pace.

Features and Benefits:

  • Easy to use interface with built-in display

  • LEDs to indicate power and errors for easy diagnoses

  • SQTPsm serialization for programming unique serial numbers (only PC host mode)

  • Alternative DOS command-line interface is available for batch control

  • SD and Multimedia card slot for on the fly use (data can be saved and loaded)

  • Buzzer sound for loud environments

  • Easily program Microchips line of dsPIC DSC and PIC devices

  • RS-232 interface and USB

  • Support for PROMATE II socket modules

Accessories:

MPLAB PM3 ICSP Cable – 667-7814
Chip Programming Adapter (AC164111) – 667-7883

Whats in the box?

Supplied with the MPLAB is; 1x MPLAB PM3 unit, RS-232 cable, USB cable, ICSP cable, power supply and cables, MPLAB IDE CD, user manual and technical documentation.

Supplied with

RS-232 cable, USB cable, ICSP cable, power supply and cables, MPLAB IDE CD, user’s manual and technical documentation on CD (Kit only).

Specificaties
Kenmerk Waarde
Interface USB
Programmer Name MPLAB PM3
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
19 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
669,15
(excl. BTW)
809,67
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 669,15
Related Products
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
P&E’s USB Multilink Universal FX is a high-speed, ...
Description:
P&E’s USB Multilink Universal FX is a high-speed, all-in-one development interface which allows a PC access to the Background Debug Mode (BDM) or JTAG interface on Freescale Kinetis, Qorivva 55xx/56xx, ColdFire V1/+V1, ColdFire V2-4, HCS08, RS08, HC(S)12(X), DSC, and HC16/683xx ...
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C ...
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs ...
Description:
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and ...