Seeit FLYPRO-SP8-B FLYPRO-SP8B, Universal Programmer / Copier

  • RS-stocknr. 919-5491
  • Fabrikantnummer FLYPRO-SP8B
  • Fabrikant Seeit
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

FLYPRO-SP8B EEPROM/FLASH Programmer

The FLYPRO-SP8-B from Seeit is a programmer designed for serial EEPROM and serial FLASH devices. It features a ZIF40 socket, an ICSP cable and a USB port. A full list of over 7000 compatible devices can be found on the datasheet.
Most i2C EEPROMs and ISP FLASHs memory is stored in the FLYPRO-SP8-B programmer library. It also supports DataFlash memory.
Simply connect your FLYPRO-SP8B to a compatible PC or laptop via its USB port, without the need for an additional power supply. A mass production mode is also available. The FLYPRO-SP8B automatically begins programming when it detects that the chips are placed correctly.
The ZIF40 socket can be used to programme the devices or alternatively the HE10 connector with the ICSP cable (provided).

FLYPRO-SP8-B kit includes:
Programmer
USB cable type A-B
ICSP-HE10 cable (10 wires)
Software CD.
User manual

Features of the FLYPRO-SP8-B:
Power supply on USB 2.0 port
Accepted file formats: BINARY, Intel (Extended) HEX, Intel HEX16, Motorola S19/S28/S37 records, Tektronix
Functions: Read/Write/Blank-Check Write/Verify/Blank-Check/Erase/Duplicate
Support low voltage devices 2 V to 5.5 V.
Overcurrent detection and short circuit protection
Support online high-speed mass production.
Supports Windows 98/ME/2000/XP/VISTA/Windows 7/Windows8/Windows10 (32 bit and 64 bit).
Dimensions: 188 x 115 x 34 mm
Weight: 195 g

PC Based Programmers

Specificaties
Kenmerk Waarde
Accessory Type Universal Programmer / Copier
For Use With DataFlash, Serial EEPROM, Serial SPI FLASH, ZIF40 Socket and ICSP Cable
Interface USB
Programmer Name FLYPRO-SP8-B
Memory Type Programmed EEPROM, FLASH
10 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 1
190,52
(excl. BTW)
230,53
(incl. BTW)
Box(es)
1 +
€ 190,52
Related Products
The CCS LOAD-n-GO is a hand-held mobile In-Circuit ...
Description:
The CCS LOAD-n-GO is a hand-held mobile In-Circuit Serial Programmer (ICSP) that offers a quick and easy 2-step solution for the in-the-field programming of PIC Microcontrollers. The device can store up to four separate firmware images or programs utilising 2 ...
The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast ...
Description:
The MPLAB® PICkit™ 4 In-Circuit Debugger/Programmer allows fast and easy debugging and programming of PIC® and dsPIC® flash microcontrollers, using the powerful graphical user interface of MPLAB X Integrated Development Environment (IDE), version 4.15. The MPLAB PICkit 4 is connected ...
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 ...