Amphenol Socapex 97 Series, Size 24, 28 Straight Cable Clamp, For Use With Jacketed Cable, Wires Protected by Tubing

  • RS-stocknr. 873-1862
  • Fabrikantnummer 97-3057-1016(621)
  • Fabrikant Amphenol
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: CN
Productomschrijving

Amphenol 97 Series Cable Clamps MS3057A

Amphenol 97 series cable clamps for jacketed cable or wires protected by tubing. Both clamping halves float for maximum strain relief.

Amphenol - 97 Series

Amphenol's 97 Connector series provide the interconnection solution for low cost, general duty applications. The connectors are widely used in a range of applications such as factory automation, robotics, machine tooling, welding equipment and medical equipment. Shell components are fabricated from high grade aluminium alloy to provide strength andl protection. The series offers a wide range of shell styles. contact patterns and accessory options.

Low cost, general duty applications
Solder or crimp termination
Available in a range of shell styles and insert patterns
Shell components are fabricated from high grade aluminium alloy
Wide selection of connector finishes - cadmium or non-cadmium (environmentally friendly zinc alloy)
Available accessories for both individual wire seal and jacketed cable
Thread coupling
Hard dielectric inserts

Approvals

UL recognized and CSA recognized

Specificaties
Kenmerk Waarde
For Use With Jacketed Cable, Wires Protected by Tubing
Shell Size 24, 28
Body Orientation Straight
Thread Size 1-7/16 in - 18
Length 25.78mm
Series 97
13 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
8,03
(excl. BTW)
9,72
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 8,03
Related Products
From Deustch, this robust plastic adaptor is for ...
Description:
From Deustch, this robust plastic adaptor is for use with HDP20 connector range. Sealed to IP67Durable – 100 mating cycles minimumVibration proof – 20g's at 10 - 2000HzCorrosion Resistant – 48hours Salt Spray to MIL STD 1344.
Connectors and moulded leads, available in the mini-DIN ...
Description:
Connectors and moulded leads, available in the mini-DIN style configuration commonly used in communication and computer applications. Their small physical size and high contact density make them very suitable for transmitting shielded data signals. Flange mountingSolder tags for ground connectionMoulded ...
This range of Cannon DL Crimp Contacts are ...
Description:
This range of Cannon DL Crimp Contacts are available with both 20μ inch and 50μ inch Gold Plating. The 20μ inch Gold Plated beryllium-copper hermaphrodite contacts are used for applications requiring over 100 milliamps to 5 amps and are physically ...
Contacts for standard density connectors (1.6mm diameter) and ...
Description:
Contacts for standard density connectors (1.6mm diameter) and high density connectors (1.0mm diameter).Blanking pins are available for filling unused 1.6mm cavities.Use Crimp Tool stock no. 194-2264 for 1.0 and 1.6mm contacts.,Alternatively use Universal Crimp Tool Frame stock no. 848-391 with ...