121 Connector Seal Wire Seal diameter 3.9mm for use with APD Series

  • RS-stocknr. 190-3484
  • Fabrikantnummer 121667-0023
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

ITT Cannon Connectors APD Series Wire Seals for 7 and 19 Way

A range of wire seals suitable for ITT Cannon Connectors APD Series 7 and 19 way connectors, offering individual wire sealing to the cable used within the connector increasing its environmental protection and durability in the field, blind seals are also available to seal those crimp housings that are unpopulated.

Note

Associated connectors: 752-5727 , 752-5736 , 752-5739 , 752-5733 , 752-5717, 752-5711, 752-5720

ITT Cannon APD Series ISO 15170 Connectors

The ITT Cannon APD series of connectors are a versatile range of full plastic direct, in-line and bulkhead circular connectors, specifically designed for the transportation, off-road and special vehicle markets. These circular connectors have a strong resistance to engine transmission and brake fluids and the associated environments. The APD series is also an ideal connector for other applications including military or industrial that require harsh environment solutions while insisting on a product that is both small in size and lightweight.The APD series of connectors cover a wide range of 1 and 2-way power solutions up to 51-way interface connectors.

Specificaties
Kenmerk Waarde
Seal Type Wire Seal
For Use With APD Series
Length 7.8mm
Diameter 3.9mm
IP Rating IP67, IP69K
Series 121
Maximum Operating Temperature +125°C
Minimum Operating Temperature -40°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-01-2021, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Pack of 5000
395,20
(excl. BTW)
478,19
(incl. BTW)
Pack(s)
Per pak
Per stuk*
1 +
€ 395,20
€ 0,079
*prijsindicatie
Related Products
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
Developed to meet the increased requirements for safety ...
Description:
Developed to meet the increased requirements for safety and reliability in the automotive field these sealed connectors satisfy all of the parameters defined by automotive/industrial standards covering such areas as vibration, shock, salt water spray, industrial gas, low millivolt drop ...
A range of hard wearing RoHS compliant, IP68 ...
Description:
A range of hard wearing RoHS compliant, IP68 sealed electrical connectors. The thumb latch mechanism and chunky keyway allows for easy connection and disconnection. Back fittings enable either half to be panel mounted or sealed to a cable. A flange ...