RS PRO Clear Passivated, Zinc Steel Clinch Nut, M6

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Self-Clinching Nuts

Case hardened mild steel, zinc plated and passivated to BS3382
Self-clinching nuts should be assembled using a press tool or similar non-shock device, Hank® bushes can be either pressed into place or may be riveted by hand
Unsuitable for use with sheet materials having a hardness of more than 80Rb (150VPN)

Clinchnuts & Thread Inserts

Specificaties
Kenmerk Waarde
Thread Size M6
Fixing Hole Diameter 8.75mm
Body Outside Diameter 11.1mm
Body Depth 4.4mm
Material Steel
Finish Clear Passivated, Zinc
Thickness of Material Maximum 2.3mm
Thickness of Material Minimum 1.4mm
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
51 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Bag of 50
8,91
(excl. BTW)
10,78
(incl. BTW)
Bag(s)
Per zak
Per stuk*
1 +
€ 8,91
€ 0,178
*prijsindicatie
Related Products
Threaded self-clinching stand-offs available in either through-hole or ...
Description:
Threaded self-clinching stand-offs available in either through-hole or blind-hole versions. Case-hardened, zinc plated mild steel, to BS3382 Stand-off remains in place after installation fastener has been removed.