ON Semiconductor NB6L14MMNGEVB, Clock-Data Fanout Buffer Evaluation Board for NB6L14MMNG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

The NB6L14M is a 3.0GHz differential 1:4 CML clock or data fanout buffer. The differential inputs incorporate internal 50-ohm termination resistors that are accessed through the VT pin. This feature allows the NB6L14M to accept various logic standards, such as CML, LVCMOS, LVTTL, CML, or LVDS logic levels. The 16mA differential CML outputs provide matching internal 50-ohm terminations and produce 400mV output swings when externally terminated with a 50-ohm resistor to VCC. The VREFAC reference output can be used to rebias capacitor-coupled differential or single-ended input signals. The 1:4 fanout design was optimized for low output skew applications. The NB6L14M is a member of the ECLinPS MAX family of high performance clock and data management products.

Specificaties
Kenmerk Waarde
Clock/Timer Function Clock-Data Fanout Buffer
Kit Classification Evaluation Board
Featured Device NB6L14MMNG
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-05-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
459,10
(excl. BTW)
555,51
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 459,10
Related Products
This document describes operation of the Silicon Laboratories ...
Description:
This document describes operation of the Silicon Laboratories Si5xxUC-EVB evaluation board designed to evaluate any of Silicon Labs’ pin-controlled or I2C configurable Si5xxXOs or VCXOs. Three device sites are available to support one of either 5mm x 7mm, 3.2mm x ...
The NB4N855SMEVB has been developed as a convenience ...
Description:
The NB4N855SMEVB has been developed as a convenience for the customers interested in performing their own device engineering assessment. This evaluation board provides a high bandwidth 50 ohm controlled impedance environment. The NB4N855SMEVB Manual contains appropriate lab setup, assembly instructions ...
The NB3N5573DTGEVB evaluation board is designed to quickly ...
Description:
The NB3N5573DTGEVB evaluation board is designed to quickly evaluate the NB3N5573 device, a high precision, low phase noise clock generator that supports PCI Express and Ethernet requirements. The device takes a 25 MHz fundamental mode parallel resonant crystal and generates ...
The NB3N3020DTG is a high precision, low phase ...
Description:
The NB3N3020DTG is a high precision, low phase noise selectable clock multiplier. The device takes a 5 - 27 MHz fundamental mode parallel resonant crystal or a 2 - 210 MHz LVCMOS single ended clock source and generates a differential ...