Huco Friction Clutch 279.25.28

  • RS-stocknr. 748-617
  • Fabrikantnummer 279.25.28
  • Fabrikant Huco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Basic 6 Plate Adjustable Friction Clutches with Set Screw and Clamp Fixings

Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.

Features and Benefits

• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device

Product Application Information

As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.

//media.rs-online.com/t_line/L748601-03.gif
//media.rs-online.com/t_line/L748601-04.gif
//media.rs-online.com/t_line/L748617-01.gif
//media.rs-online.com/t_line/LI748601-02.gif
//media.rs-online.com/t_line/LI748601-03.gif
//media.rs-online.com/t_line/LI748601-04.gif
Specificaties
Kenmerk Waarde
Bore 8mm
Torque Rating 132Ncm
Body Diameter 25.8mm
38 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
55 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
45,01
(excl. BTW)
54,46
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 45,01
5 +
€ 43,63
Related Products
Rotary friction devices fitted with a knurled adjuster ...
Description:
Rotary friction devices fitted with a knurled adjuster ring for setting drag or slip torque. Controlled slip occurs between the hub and housing whenever the load exceeds the pre-set value. Through bored hub allows for spindle mounting from either endSuitable ...
Friction torque limiters provide low-cost protection of the ...
Description:
Friction torque limiters provide low-cost protection of the motor gearbox to avoid accidental collision. The DF basic model has been designed for parallel shaft transmission, with plate wheels, gear pairs or pulleys. The DF/TAC series with chain coupling is a ...
Friction torque limiters provide low-cost protection of the ...
Description:
Friction torque limiters provide low-cost protection of the motor gearbox to avoid accidental collision. The DF basic model has been designed for parallel shaft transmission, with plate wheels, gear pairs or pulleys. The DF/TAC series with chain coupling is a ...
In certain circumstances the adjuster ring can unscrew ...
Description:
In certain circumstances the adjuster ring can unscrew during operation. If this happens the V-TK locking ring can be fitted securing the adjuster ring. Size 25 only.