Huco Friction Clutch 279P25.22.RS

  • RS-stocknr. 890-3045
  • Fabrikantnummer 279P25.22.RS
  • Fabrikant Huco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Basic 6 Plate Adjustable Friction Clutches with Set Screw and Clamp Fixings

Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.

Features and Benefits

• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device

Product Application Information

As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.

//media.rs-online.com/t_line/L8903045-01.jpg
Specificaties
Kenmerk Waarde
Bore 6mm
Torque Rating 132Ncm
Body Diameter 25.8mm
12 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
41,05
(excl. BTW)
49,67
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 41,05
5 - 9
€ 39,78
10 +
€ 38,49
Related Products
Friction torque limiters provide low-cost protection of the ...
Description:
Friction torque limiters provide low-cost protection of the motor gearbox to avoid accidental collision. The DF basic model has been designed for parallel shaft transmission, with plate wheels, gear pairs or pulleys. The DF/TAC series with chain coupling is a ...
Friction torque limiters provide low-cost protection of the ...
Description:
Friction torque limiters provide low-cost protection of the motor gearbox to avoid accidental collision. The DF basic model has been designed for parallel shaft transmission, with plate wheels, gear pairs or pulleys. The DF/TAC series with chain coupling is a ...
In certain circumstances the adjuster ring can unscrew ...
Description:
In certain circumstances the adjuster ring can unscrew during operation. If this happens the V-TK locking ring can be fitted securing the adjuster ring. Size 25 only.
Compact design 24Vdc electromagnetic clutches available with either ...
Description:
Compact design 24Vdc electromagnetic clutches available with either shaft or coupling mounting. The armature hub assembly is mounted to the same shaft as the rotor assembly and the field assembly is mounted on the shaft and retained by a loose ...