Huco Electromagnetic Clutch Shaft M.0109.2111

  • RS-stocknr. 267-7680
  • Fabrikantnummer M.0109.2111
  • Fabrikant Huco
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

Clutch - Shaft Mount Series SL

Compact design 24Vdc electromagnetic clutches available with either shaft or coupling mounting. The armature hub assembly is mounted to the same shaft as the rotor assembly and the field assembly is mounted on the shaft and retained by a loose fitting pin or bracket through the anti-rotation tab.

Shaft mounting design allows two parallel shafts to be coupled and the armature hub can accommodate a pulley, gear, sprocket etc. to transmit torque to the second shaft.
Coupling mounting types allow end-to-end shafts to be connected

//media.rs-online.com/t_line/L267769-01.gif
Specificaties
Kenmerk Waarde
Mounting Shaft
Torque Rating 0.28Nm
Supply Voltage 24V dc
Bore Diameter 5mm
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
123,64
(excl. BTW)
149,60
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 123,64
5 +
€ 120,21
Related Products
The FB series power-on brakes are used to ...
Description:
The FB series power-on brakes are used to stop or hold inertial load that is coupled to the armature hub assembly. The armature hub is attached to the load shaft. The field assembly is mounted to a bulkhead that is ...
The FSB series brakes are designed to decelerate ...
Description:
The FSB series brakes are designed to decelerate or hold inertial loads when the voltage is turned off either intentionally or accidentally during a power failure. They can be mounted on either a bulkhead or a motor. These electromagnetic brakes ...
24Vdc flange mounted brakes designed to decelerate or ...
Description:
24Vdc flange mounted brakes designed to decelerate or hold inertial loads when the voltage is turned off. The friction disc is coupled to the shaft to be braked, but is capable of moving axiallyThrough several compression springs the axial force ...
24Vdc reverse mounted brakes designed to decelerate or ...
Description:
24Vdc reverse mounted brakes designed to decelerate or hold inertial loads when the voltage is turned off. The friction disc is coupled to the shaft to be braked, but is capable of moving axiallyThrough several compression springs the axial force ...