TE Connectivity Straight Cable Mount FME Connector, Plug, Crimp Termination, 50Ω 0 → 2GHz

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

TE Connectivity 50 Ohm FME Connectors - Crimp Plug

50 Ohm FME straight crimp plug with PTFE dielectric and nickel plated body. This 50 Ohm FME straight crimp plug is suitable for use with the following RF coaxial crimp cables :RG-58 C/U, RG-141 A/U, RG-303/U, URM 43, URM 76, KX 15

Approvals

-

Specificaties
Kenmerk Waarde
Gender Male
Mounting Type Cable Mount
Impedance 50Ω
Termination Method Crimp
Body Orientation Straight
Cable Type RG141 A/U, RG303/U, RG58 C/U
Operating Frequency 0 → 2GHz
Body Plating Nickel
Contact Material Brass
Contact Plating Gold
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-10-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 50)
3,368
(excl. BTW)
4,075
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
50 +
€ 3,368
€ 168,40
*prijsindicatie
Related Products
The Connex BNC connectors are made to a ...
Description:
The Connex BNC connectors are made to a high quality level. Medium size coaxial connectors with bayonet lock. 50 ohm impedance for applications up to 4 GHz and 75 ohm impedance up to 2 GHz. 75 Ohm Series Within the ...
The FME series HF connectors are used for ...
Description:
The FME series HF connectors are used for mobile equipment → 1.8 GHz. Due to its small size, it can be installed in vehicles. Applications: antennas, car phones etc. Spring-loaded contact parts made from CuPb1.5Ni1 and the insulated parts are ...
Professional Grade 75 Ohm bulkhead rear and front ...
Description:
Professional Grade 75 Ohm bulkhead rear and front mounting jack-jack adapters with a nickel plated brass body requiring a 12 x 12.7mm panel cut-out.Stock number 680-7469 has a DELRIN dielectricStock number 718-2556 has a PTFE dielectric.
A range of BNC Jack to Jack Bulkhead ...
Description:
A range of BNC Jack to Jack Bulkhead Adaptors supplied with Hex Nut and Lockwasher .These BNC Jack to Jack Bulkhead Adaptors require a cut out of Ø12.7 mm with 12.1 mm flat.